File: | hw/arm/omap1.c |
Location: | line 1724, column 15 |
Description: | Value stored to 'cpu' during its initialization is never read |
1 | /* |
2 | * TI OMAP processors emulation. |
3 | * |
4 | * Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org> |
5 | * |
6 | * This program is free software; you can redistribute it and/or |
7 | * modify it under the terms of the GNU General Public License as |
8 | * published by the Free Software Foundation; either version 2 or |
9 | * (at your option) version 3 of the License. |
10 | * |
11 | * This program is distributed in the hope that it will be useful, |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
14 | * GNU General Public License for more details. |
15 | * |
16 | * You should have received a copy of the GNU General Public License along |
17 | * with this program; if not, see <http://www.gnu.org/licenses/>. |
18 | */ |
19 | #include "hw/hw.h" |
20 | #include "hw/arm/arm.h" |
21 | #include "hw/arm/omap.h" |
22 | #include "sysemu/sysemu.h" |
23 | #include "hw/arm/soc_dma.h" |
24 | #include "sysemu/blockdev.h" |
25 | #include "qemu/range.h" |
26 | #include "hw/sysbus.h" |
27 | |
28 | /* Should signal the TCMI/GPMC */ |
29 | uint32_t omap_badwidth_read8(void *opaque, hwaddr addr) |
30 | { |
31 | uint8_t ret; |
32 | |
33 | OMAP_8B_REG(addr)fprintf(stderr, "%s: 8-bit register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
34 | cpu_physical_memory_read(addr, &ret, 1); |
35 | return ret; |
36 | } |
37 | |
38 | void omap_badwidth_write8(void *opaque, hwaddr addr, |
39 | uint32_t value) |
40 | { |
41 | uint8_t val8 = value; |
42 | |
43 | OMAP_8B_REG(addr)fprintf(stderr, "%s: 8-bit register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
44 | cpu_physical_memory_write(addr, &val8, 1); |
45 | } |
46 | |
47 | uint32_t omap_badwidth_read16(void *opaque, hwaddr addr) |
48 | { |
49 | uint16_t ret; |
50 | |
51 | OMAP_16B_REG(addr)fprintf(stderr, "%s: 16-bit register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
52 | cpu_physical_memory_read(addr, &ret, 2); |
53 | return ret; |
54 | } |
55 | |
56 | void omap_badwidth_write16(void *opaque, hwaddr addr, |
57 | uint32_t value) |
58 | { |
59 | uint16_t val16 = value; |
60 | |
61 | OMAP_16B_REG(addr)fprintf(stderr, "%s: 16-bit register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
62 | cpu_physical_memory_write(addr, &val16, 2); |
63 | } |
64 | |
65 | uint32_t omap_badwidth_read32(void *opaque, hwaddr addr) |
66 | { |
67 | uint32_t ret; |
68 | |
69 | OMAP_32B_REG(addr)fprintf(stderr, "%s: 32-bit register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
70 | cpu_physical_memory_read(addr, &ret, 4); |
71 | return ret; |
72 | } |
73 | |
74 | void omap_badwidth_write32(void *opaque, hwaddr addr, |
75 | uint32_t value) |
76 | { |
77 | OMAP_32B_REG(addr)fprintf(stderr, "%s: 32-bit register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
78 | cpu_physical_memory_write(addr, &value, 4); |
79 | } |
80 | |
81 | /* MPU OS timers */ |
82 | struct omap_mpu_timer_s { |
83 | MemoryRegion iomem; |
84 | qemu_irq irq; |
85 | omap_clk clk; |
86 | uint32_t val; |
87 | int64_t time; |
88 | QEMUTimer *timer; |
89 | QEMUBH *tick; |
90 | int64_t rate; |
91 | int it_ena; |
92 | |
93 | int enable; |
94 | int ptv; |
95 | int ar; |
96 | int st; |
97 | uint32_t reset_val; |
98 | }; |
99 | |
100 | static inline uint32_t omap_timer_read(struct omap_mpu_timer_s *timer) |
101 | { |
102 | uint64_t distance = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - timer->time; |
103 | |
104 | if (timer->st && timer->enable && timer->rate) |
105 | return timer->val - muldiv64(distance >> (timer->ptv + 1), |
106 | timer->rate, get_ticks_per_sec()); |
107 | else |
108 | return timer->val; |
109 | } |
110 | |
111 | static inline void omap_timer_sync(struct omap_mpu_timer_s *timer) |
112 | { |
113 | timer->val = omap_timer_read(timer); |
114 | timer->time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
115 | } |
116 | |
117 | static inline void omap_timer_update(struct omap_mpu_timer_s *timer) |
118 | { |
119 | int64_t expires; |
120 | |
121 | if (timer->enable && timer->st && timer->rate) { |
122 | timer->val = timer->reset_val; /* Should skip this on clk enable */ |
123 | expires = muldiv64((uint64_t) timer->val << (timer->ptv + 1), |
124 | get_ticks_per_sec(), timer->rate); |
125 | |
126 | /* If timer expiry would be sooner than in about 1 ms and |
127 | * auto-reload isn't set, then fire immediately. This is a hack |
128 | * to make systems like PalmOS run in acceptable time. PalmOS |
129 | * sets the interval to a very low value and polls the status bit |
130 | * in a busy loop when it wants to sleep just a couple of CPU |
131 | * ticks. */ |
132 | if (expires > (get_ticks_per_sec() >> 10) || timer->ar) |
133 | timer_mod(timer->timer, timer->time + expires); |
134 | else |
135 | qemu_bh_schedule(timer->tick); |
136 | } else |
137 | timer_del(timer->timer); |
138 | } |
139 | |
140 | static void omap_timer_fire(void *opaque) |
141 | { |
142 | struct omap_mpu_timer_s *timer = opaque; |
143 | |
144 | if (!timer->ar) { |
145 | timer->val = 0; |
146 | timer->st = 0; |
147 | } |
148 | |
149 | if (timer->it_ena) |
150 | /* Edge-triggered irq */ |
151 | qemu_irq_pulse(timer->irq); |
152 | } |
153 | |
154 | static void omap_timer_tick(void *opaque) |
155 | { |
156 | struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; |
157 | |
158 | omap_timer_sync(timer); |
159 | omap_timer_fire(timer); |
160 | omap_timer_update(timer); |
161 | } |
162 | |
163 | static void omap_timer_clk_update(void *opaque, int line, int on) |
164 | { |
165 | struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; |
166 | |
167 | omap_timer_sync(timer); |
168 | timer->rate = on ? omap_clk_getrate(timer->clk) : 0; |
169 | omap_timer_update(timer); |
170 | } |
171 | |
172 | static void omap_timer_clk_setup(struct omap_mpu_timer_s *timer) |
173 | { |
174 | omap_clk_adduser(timer->clk, |
175 | qemu_allocate_irqs(omap_timer_clk_update, timer, 1)[0]); |
176 | timer->rate = omap_clk_getrate(timer->clk); |
177 | } |
178 | |
179 | static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, |
180 | unsigned size) |
181 | { |
182 | struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; |
183 | |
184 | if (size != 4) { |
185 | return omap_badwidth_read32(opaque, addr); |
186 | } |
187 | |
188 | switch (addr) { |
189 | case 0x00: /* CNTL_TIMER */ |
190 | return (s->enable << 5) | (s->ptv << 2) | (s->ar << 1) | s->st; |
191 | |
192 | case 0x04: /* LOAD_TIM */ |
193 | break; |
194 | |
195 | case 0x08: /* READ_TIM */ |
196 | return omap_timer_read(s); |
197 | } |
198 | |
199 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
200 | return 0; |
201 | } |
202 | |
203 | static void omap_mpu_timer_write(void *opaque, hwaddr addr, |
204 | uint64_t value, unsigned size) |
205 | { |
206 | struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; |
207 | |
208 | if (size != 4) { |
209 | return omap_badwidth_write32(opaque, addr, value); |
210 | } |
211 | |
212 | switch (addr) { |
213 | case 0x00: /* CNTL_TIMER */ |
214 | omap_timer_sync(s); |
215 | s->enable = (value >> 5) & 1; |
216 | s->ptv = (value >> 2) & 7; |
217 | s->ar = (value >> 1) & 1; |
218 | s->st = value & 1; |
219 | omap_timer_update(s); |
220 | return; |
221 | |
222 | case 0x04: /* LOAD_TIM */ |
223 | s->reset_val = value; |
224 | return; |
225 | |
226 | case 0x08: /* READ_TIM */ |
227 | OMAP_RO_REG(addr)fprintf(stderr, "%s: Read-only register " "%#08" "l" "x" "\n" , __FUNCTION__, addr); |
228 | break; |
229 | |
230 | default: |
231 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
232 | } |
233 | } |
234 | |
235 | static const MemoryRegionOps omap_mpu_timer_ops = { |
236 | .read = omap_mpu_timer_read, |
237 | .write = omap_mpu_timer_write, |
238 | .endianness = DEVICE_LITTLE_ENDIAN, |
239 | }; |
240 | |
241 | static void omap_mpu_timer_reset(struct omap_mpu_timer_s *s) |
242 | { |
243 | timer_del(s->timer); |
244 | s->enable = 0; |
245 | s->reset_val = 31337; |
246 | s->val = 0; |
247 | s->ptv = 0; |
248 | s->ar = 0; |
249 | s->st = 0; |
250 | s->it_ena = 1; |
251 | } |
252 | |
253 | static struct omap_mpu_timer_s *omap_mpu_timer_init(MemoryRegion *system_memory, |
254 | hwaddr base, |
255 | qemu_irq irq, omap_clk clk) |
256 | { |
257 | struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) |
258 | g_malloc0(sizeof(struct omap_mpu_timer_s)); |
259 | |
260 | s->irq = irq; |
261 | s->clk = clk; |
262 | s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_timer_tick, s); |
263 | s->tick = qemu_bh_new(omap_timer_fire, s); |
264 | omap_mpu_timer_reset(s); |
265 | omap_timer_clk_setup(s); |
266 | |
267 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_mpu_timer_ops, s, |
268 | "omap-mpu-timer", 0x100); |
269 | |
270 | memory_region_add_subregion(system_memory, base, &s->iomem); |
271 | |
272 | return s; |
273 | } |
274 | |
275 | /* Watchdog timer */ |
276 | struct omap_watchdog_timer_s { |
277 | struct omap_mpu_timer_s timer; |
278 | MemoryRegion iomem; |
279 | uint8_t last_wr; |
280 | int mode; |
281 | int free; |
282 | int reset; |
283 | }; |
284 | |
285 | static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, |
286 | unsigned size) |
287 | { |
288 | struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; |
289 | |
290 | if (size != 2) { |
291 | return omap_badwidth_read16(opaque, addr); |
292 | } |
293 | |
294 | switch (addr) { |
295 | case 0x00: /* CNTL_TIMER */ |
296 | return (s->timer.ptv << 9) | (s->timer.ar << 8) | |
297 | (s->timer.st << 7) | (s->free << 1); |
298 | |
299 | case 0x04: /* READ_TIMER */ |
300 | return omap_timer_read(&s->timer); |
301 | |
302 | case 0x08: /* TIMER_MODE */ |
303 | return s->mode << 15; |
304 | } |
305 | |
306 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
307 | return 0; |
308 | } |
309 | |
310 | static void omap_wd_timer_write(void *opaque, hwaddr addr, |
311 | uint64_t value, unsigned size) |
312 | { |
313 | struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; |
314 | |
315 | if (size != 2) { |
316 | return omap_badwidth_write16(opaque, addr, value); |
317 | } |
318 | |
319 | switch (addr) { |
320 | case 0x00: /* CNTL_TIMER */ |
321 | omap_timer_sync(&s->timer); |
322 | s->timer.ptv = (value >> 9) & 7; |
323 | s->timer.ar = (value >> 8) & 1; |
324 | s->timer.st = (value >> 7) & 1; |
325 | s->free = (value >> 1) & 1; |
326 | omap_timer_update(&s->timer); |
327 | break; |
328 | |
329 | case 0x04: /* LOAD_TIMER */ |
330 | s->timer.reset_val = value & 0xffff; |
331 | break; |
332 | |
333 | case 0x08: /* TIMER_MODE */ |
334 | if (!s->mode && ((value >> 15) & 1)) |
335 | omap_clk_get(s->timer.clk); |
336 | s->mode |= (value >> 15) & 1; |
337 | if (s->last_wr == 0xf5) { |
338 | if ((value & 0xff) == 0xa0) { |
339 | if (s->mode) { |
340 | s->mode = 0; |
341 | omap_clk_put(s->timer.clk); |
342 | } |
343 | } else { |
344 | /* XXX: on T|E hardware somehow this has no effect, |
345 | * on Zire 71 it works as specified. */ |
346 | s->reset = 1; |
347 | qemu_system_reset_request(); |
348 | } |
349 | } |
350 | s->last_wr = value & 0xff; |
351 | break; |
352 | |
353 | default: |
354 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
355 | } |
356 | } |
357 | |
358 | static const MemoryRegionOps omap_wd_timer_ops = { |
359 | .read = omap_wd_timer_read, |
360 | .write = omap_wd_timer_write, |
361 | .endianness = DEVICE_NATIVE_ENDIAN, |
362 | }; |
363 | |
364 | static void omap_wd_timer_reset(struct omap_watchdog_timer_s *s) |
365 | { |
366 | timer_del(s->timer.timer); |
367 | if (!s->mode) |
368 | omap_clk_get(s->timer.clk); |
369 | s->mode = 1; |
370 | s->free = 1; |
371 | s->reset = 0; |
372 | s->timer.enable = 1; |
373 | s->timer.it_ena = 1; |
374 | s->timer.reset_val = 0xffff; |
375 | s->timer.val = 0; |
376 | s->timer.st = 0; |
377 | s->timer.ptv = 0; |
378 | s->timer.ar = 0; |
379 | omap_timer_update(&s->timer); |
380 | } |
381 | |
382 | static struct omap_watchdog_timer_s *omap_wd_timer_init(MemoryRegion *memory, |
383 | hwaddr base, |
384 | qemu_irq irq, omap_clk clk) |
385 | { |
386 | struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) |
387 | g_malloc0(sizeof(struct omap_watchdog_timer_s)); |
388 | |
389 | s->timer.irq = irq; |
390 | s->timer.clk = clk; |
391 | s->timer.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_timer_tick, &s->timer); |
392 | omap_wd_timer_reset(s); |
393 | omap_timer_clk_setup(&s->timer); |
394 | |
395 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_wd_timer_ops, s, |
396 | "omap-wd-timer", 0x100); |
397 | memory_region_add_subregion(memory, base, &s->iomem); |
398 | |
399 | return s; |
400 | } |
401 | |
402 | /* 32-kHz timer */ |
403 | struct omap_32khz_timer_s { |
404 | struct omap_mpu_timer_s timer; |
405 | MemoryRegion iomem; |
406 | }; |
407 | |
408 | static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, |
409 | unsigned size) |
410 | { |
411 | struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; |
412 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
413 | |
414 | if (size != 4) { |
415 | return omap_badwidth_read32(opaque, addr); |
416 | } |
417 | |
418 | switch (offset) { |
419 | case 0x00: /* TVR */ |
420 | return s->timer.reset_val; |
421 | |
422 | case 0x04: /* TCR */ |
423 | return omap_timer_read(&s->timer); |
424 | |
425 | case 0x08: /* CR */ |
426 | return (s->timer.ar << 3) | (s->timer.it_ena << 2) | s->timer.st; |
427 | |
428 | default: |
429 | break; |
430 | } |
431 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
432 | return 0; |
433 | } |
434 | |
435 | static void omap_os_timer_write(void *opaque, hwaddr addr, |
436 | uint64_t value, unsigned size) |
437 | { |
438 | struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; |
439 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
440 | |
441 | if (size != 4) { |
442 | return omap_badwidth_write32(opaque, addr, value); |
443 | } |
444 | |
445 | switch (offset) { |
446 | case 0x00: /* TVR */ |
447 | s->timer.reset_val = value & 0x00ffffff; |
448 | break; |
449 | |
450 | case 0x04: /* TCR */ |
451 | OMAP_RO_REG(addr)fprintf(stderr, "%s: Read-only register " "%#08" "l" "x" "\n" , __FUNCTION__, addr); |
452 | break; |
453 | |
454 | case 0x08: /* CR */ |
455 | s->timer.ar = (value >> 3) & 1; |
456 | s->timer.it_ena = (value >> 2) & 1; |
457 | if (s->timer.st != (value & 1) || (value & 2)) { |
458 | omap_timer_sync(&s->timer); |
459 | s->timer.enable = value & 1; |
460 | s->timer.st = value & 1; |
461 | omap_timer_update(&s->timer); |
462 | } |
463 | break; |
464 | |
465 | default: |
466 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
467 | } |
468 | } |
469 | |
470 | static const MemoryRegionOps omap_os_timer_ops = { |
471 | .read = omap_os_timer_read, |
472 | .write = omap_os_timer_write, |
473 | .endianness = DEVICE_NATIVE_ENDIAN, |
474 | }; |
475 | |
476 | static void omap_os_timer_reset(struct omap_32khz_timer_s *s) |
477 | { |
478 | timer_del(s->timer.timer); |
479 | s->timer.enable = 0; |
480 | s->timer.it_ena = 0; |
481 | s->timer.reset_val = 0x00ffffff; |
482 | s->timer.val = 0; |
483 | s->timer.st = 0; |
484 | s->timer.ptv = 0; |
485 | s->timer.ar = 1; |
486 | } |
487 | |
488 | static struct omap_32khz_timer_s *omap_os_timer_init(MemoryRegion *memory, |
489 | hwaddr base, |
490 | qemu_irq irq, omap_clk clk) |
491 | { |
492 | struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) |
493 | g_malloc0(sizeof(struct omap_32khz_timer_s)); |
494 | |
495 | s->timer.irq = irq; |
496 | s->timer.clk = clk; |
497 | s->timer.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_timer_tick, &s->timer); |
498 | omap_os_timer_reset(s); |
499 | omap_timer_clk_setup(&s->timer); |
500 | |
501 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_os_timer_ops, s, |
502 | "omap-os-timer", 0x800); |
503 | memory_region_add_subregion(memory, base, &s->iomem); |
504 | |
505 | return s; |
506 | } |
507 | |
508 | /* Ultra Low-Power Device Module */ |
509 | static uint64_t omap_ulpd_pm_read(void *opaque, hwaddr addr, |
510 | unsigned size) |
511 | { |
512 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
513 | uint16_t ret; |
514 | |
515 | if (size != 2) { |
516 | return omap_badwidth_read16(opaque, addr); |
517 | } |
518 | |
519 | switch (addr) { |
520 | case 0x14: /* IT_STATUS */ |
521 | ret = s->ulpd_pm_regs[addr >> 2]; |
522 | s->ulpd_pm_regs[addr >> 2] = 0; |
523 | qemu_irq_lower(qdev_get_gpio_in(s->ih[1], OMAP_INT_GAUGE_32K24)); |
524 | return ret; |
525 | |
526 | case 0x18: /* Reserved */ |
527 | case 0x1c: /* Reserved */ |
528 | case 0x20: /* Reserved */ |
529 | case 0x28: /* Reserved */ |
530 | case 0x2c: /* Reserved */ |
531 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
532 | /* fall through */ |
533 | case 0x00: /* COUNTER_32_LSB */ |
534 | case 0x04: /* COUNTER_32_MSB */ |
535 | case 0x08: /* COUNTER_HIGH_FREQ_LSB */ |
536 | case 0x0c: /* COUNTER_HIGH_FREQ_MSB */ |
537 | case 0x10: /* GAUGING_CTRL */ |
538 | case 0x24: /* SETUP_ANALOG_CELL3_ULPD1 */ |
539 | case 0x30: /* CLOCK_CTRL */ |
540 | case 0x34: /* SOFT_REQ */ |
541 | case 0x38: /* COUNTER_32_FIQ */ |
542 | case 0x3c: /* DPLL_CTRL */ |
543 | case 0x40: /* STATUS_REQ */ |
544 | /* XXX: check clk::usecount state for every clock */ |
545 | case 0x48: /* LOCL_TIME */ |
546 | case 0x4c: /* APLL_CTRL */ |
547 | case 0x50: /* POWER_CTRL */ |
548 | return s->ulpd_pm_regs[addr >> 2]; |
549 | } |
550 | |
551 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
552 | return 0; |
553 | } |
554 | |
555 | static inline void omap_ulpd_clk_update(struct omap_mpu_state_s *s, |
556 | uint16_t diff, uint16_t value) |
557 | { |
558 | if (diff & (1 << 4)) /* USB_MCLK_EN */ |
559 | omap_clk_onoff(omap_findclk(s, "usb_clk0"), (value >> 4) & 1); |
560 | if (diff & (1 << 5)) /* DIS_USB_PVCI_CLK */ |
561 | omap_clk_onoff(omap_findclk(s, "usb_w2fc_ck"), (~value >> 5) & 1); |
562 | } |
563 | |
564 | static inline void omap_ulpd_req_update(struct omap_mpu_state_s *s, |
565 | uint16_t diff, uint16_t value) |
566 | { |
567 | if (diff & (1 << 0)) /* SOFT_DPLL_REQ */ |
568 | omap_clk_canidle(omap_findclk(s, "dpll4"), (~value >> 0) & 1); |
569 | if (diff & (1 << 1)) /* SOFT_COM_REQ */ |
570 | omap_clk_canidle(omap_findclk(s, "com_mclk_out"), (~value >> 1) & 1); |
571 | if (diff & (1 << 2)) /* SOFT_SDW_REQ */ |
572 | omap_clk_canidle(omap_findclk(s, "bt_mclk_out"), (~value >> 2) & 1); |
573 | if (diff & (1 << 3)) /* SOFT_USB_REQ */ |
574 | omap_clk_canidle(omap_findclk(s, "usb_clk0"), (~value >> 3) & 1); |
575 | } |
576 | |
577 | static void omap_ulpd_pm_write(void *opaque, hwaddr addr, |
578 | uint64_t value, unsigned size) |
579 | { |
580 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
581 | int64_t now, ticks; |
582 | int div, mult; |
583 | static const int bypass_div[4] = { 1, 2, 4, 4 }; |
584 | uint16_t diff; |
585 | |
586 | if (size != 2) { |
587 | return omap_badwidth_write16(opaque, addr, value); |
588 | } |
589 | |
590 | switch (addr) { |
591 | case 0x00: /* COUNTER_32_LSB */ |
592 | case 0x04: /* COUNTER_32_MSB */ |
593 | case 0x08: /* COUNTER_HIGH_FREQ_LSB */ |
594 | case 0x0c: /* COUNTER_HIGH_FREQ_MSB */ |
595 | case 0x14: /* IT_STATUS */ |
596 | case 0x40: /* STATUS_REQ */ |
597 | OMAP_RO_REG(addr)fprintf(stderr, "%s: Read-only register " "%#08" "l" "x" "\n" , __FUNCTION__, addr); |
598 | break; |
599 | |
600 | case 0x10: /* GAUGING_CTRL */ |
601 | /* Bits 0 and 1 seem to be confused in the OMAP 310 TRM */ |
602 | if ((s->ulpd_pm_regs[addr >> 2] ^ value) & 1) { |
603 | now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
604 | |
605 | if (value & 1) |
606 | s->ulpd_gauge_start = now; |
607 | else { |
608 | now -= s->ulpd_gauge_start; |
609 | |
610 | /* 32-kHz ticks */ |
611 | ticks = muldiv64(now, 32768, get_ticks_per_sec()); |
612 | s->ulpd_pm_regs[0x00 >> 2] = (ticks >> 0) & 0xffff; |
613 | s->ulpd_pm_regs[0x04 >> 2] = (ticks >> 16) & 0xffff; |
614 | if (ticks >> 32) /* OVERFLOW_32K */ |
615 | s->ulpd_pm_regs[0x14 >> 2] |= 1 << 2; |
616 | |
617 | /* High frequency ticks */ |
618 | ticks = muldiv64(now, 12000000, get_ticks_per_sec()); |
619 | s->ulpd_pm_regs[0x08 >> 2] = (ticks >> 0) & 0xffff; |
620 | s->ulpd_pm_regs[0x0c >> 2] = (ticks >> 16) & 0xffff; |
621 | if (ticks >> 32) /* OVERFLOW_HI_FREQ */ |
622 | s->ulpd_pm_regs[0x14 >> 2] |= 1 << 1; |
623 | |
624 | s->ulpd_pm_regs[0x14 >> 2] |= 1 << 0; /* IT_GAUGING */ |
625 | qemu_irq_raise(qdev_get_gpio_in(s->ih[1], OMAP_INT_GAUGE_32K24)); |
626 | } |
627 | } |
628 | s->ulpd_pm_regs[addr >> 2] = value; |
629 | break; |
630 | |
631 | case 0x18: /* Reserved */ |
632 | case 0x1c: /* Reserved */ |
633 | case 0x20: /* Reserved */ |
634 | case 0x28: /* Reserved */ |
635 | case 0x2c: /* Reserved */ |
636 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
637 | /* fall through */ |
638 | case 0x24: /* SETUP_ANALOG_CELL3_ULPD1 */ |
639 | case 0x38: /* COUNTER_32_FIQ */ |
640 | case 0x48: /* LOCL_TIME */ |
641 | case 0x50: /* POWER_CTRL */ |
642 | s->ulpd_pm_regs[addr >> 2] = value; |
643 | break; |
644 | |
645 | case 0x30: /* CLOCK_CTRL */ |
646 | diff = s->ulpd_pm_regs[addr >> 2] ^ value; |
647 | s->ulpd_pm_regs[addr >> 2] = value & 0x3f; |
648 | omap_ulpd_clk_update(s, diff, value); |
649 | break; |
650 | |
651 | case 0x34: /* SOFT_REQ */ |
652 | diff = s->ulpd_pm_regs[addr >> 2] ^ value; |
653 | s->ulpd_pm_regs[addr >> 2] = value & 0x1f; |
654 | omap_ulpd_req_update(s, diff, value); |
655 | break; |
656 | |
657 | case 0x3c: /* DPLL_CTRL */ |
658 | /* XXX: OMAP310 TRM claims bit 3 is PLL_ENABLE, and bit 4 is |
659 | * omitted altogether, probably a typo. */ |
660 | /* This register has identical semantics with DPLL(1:3) control |
661 | * registers, see omap_dpll_write() */ |
662 | diff = s->ulpd_pm_regs[addr >> 2] & value; |
663 | s->ulpd_pm_regs[addr >> 2] = value & 0x2fff; |
664 | if (diff & (0x3ff << 2)) { |
665 | if (value & (1 << 4)) { /* PLL_ENABLE */ |
666 | div = ((value >> 5) & 3) + 1; /* PLL_DIV */ |
667 | mult = MIN((value >> 7) & 0x1f, 1)((((value >> 7) & 0x1f) < (1)) ? ((value >> 7) & 0x1f) : (1)); /* PLL_MULT */ |
668 | } else { |
669 | div = bypass_div[((value >> 2) & 3)]; /* BYPASS_DIV */ |
670 | mult = 1; |
671 | } |
672 | omap_clk_setrate(omap_findclk(s, "dpll4"), div, mult); |
673 | } |
674 | |
675 | /* Enter the desired mode. */ |
676 | s->ulpd_pm_regs[addr >> 2] = |
677 | (s->ulpd_pm_regs[addr >> 2] & 0xfffe) | |
678 | ((s->ulpd_pm_regs[addr >> 2] >> 4) & 1); |
679 | |
680 | /* Act as if the lock is restored. */ |
681 | s->ulpd_pm_regs[addr >> 2] |= 2; |
682 | break; |
683 | |
684 | case 0x4c: /* APLL_CTRL */ |
685 | diff = s->ulpd_pm_regs[addr >> 2] & value; |
686 | s->ulpd_pm_regs[addr >> 2] = value & 0xf; |
687 | if (diff & (1 << 0)) /* APLL_NDPLL_SWITCH */ |
688 | omap_clk_reparent(omap_findclk(s, "ck_48m"), omap_findclk(s, |
689 | (value & (1 << 0)) ? "apll" : "dpll4")); |
690 | break; |
691 | |
692 | default: |
693 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
694 | } |
695 | } |
696 | |
697 | static const MemoryRegionOps omap_ulpd_pm_ops = { |
698 | .read = omap_ulpd_pm_read, |
699 | .write = omap_ulpd_pm_write, |
700 | .endianness = DEVICE_NATIVE_ENDIAN, |
701 | }; |
702 | |
703 | static void omap_ulpd_pm_reset(struct omap_mpu_state_s *mpu) |
704 | { |
705 | mpu->ulpd_pm_regs[0x00 >> 2] = 0x0001; |
706 | mpu->ulpd_pm_regs[0x04 >> 2] = 0x0000; |
707 | mpu->ulpd_pm_regs[0x08 >> 2] = 0x0001; |
708 | mpu->ulpd_pm_regs[0x0c >> 2] = 0x0000; |
709 | mpu->ulpd_pm_regs[0x10 >> 2] = 0x0000; |
710 | mpu->ulpd_pm_regs[0x18 >> 2] = 0x01; |
711 | mpu->ulpd_pm_regs[0x1c >> 2] = 0x01; |
712 | mpu->ulpd_pm_regs[0x20 >> 2] = 0x01; |
713 | mpu->ulpd_pm_regs[0x24 >> 2] = 0x03ff; |
714 | mpu->ulpd_pm_regs[0x28 >> 2] = 0x01; |
715 | mpu->ulpd_pm_regs[0x2c >> 2] = 0x01; |
716 | omap_ulpd_clk_update(mpu, mpu->ulpd_pm_regs[0x30 >> 2], 0x0000); |
717 | mpu->ulpd_pm_regs[0x30 >> 2] = 0x0000; |
718 | omap_ulpd_req_update(mpu, mpu->ulpd_pm_regs[0x34 >> 2], 0x0000); |
719 | mpu->ulpd_pm_regs[0x34 >> 2] = 0x0000; |
720 | mpu->ulpd_pm_regs[0x38 >> 2] = 0x0001; |
721 | mpu->ulpd_pm_regs[0x3c >> 2] = 0x2211; |
722 | mpu->ulpd_pm_regs[0x40 >> 2] = 0x0000; /* FIXME: dump a real STATUS_REQ */ |
723 | mpu->ulpd_pm_regs[0x48 >> 2] = 0x960; |
724 | mpu->ulpd_pm_regs[0x4c >> 2] = 0x08; |
725 | mpu->ulpd_pm_regs[0x50 >> 2] = 0x08; |
726 | omap_clk_setrate(omap_findclk(mpu, "dpll4"), 1, 4); |
727 | omap_clk_reparent(omap_findclk(mpu, "ck_48m"), omap_findclk(mpu, "dpll4")); |
728 | } |
729 | |
730 | static void omap_ulpd_pm_init(MemoryRegion *system_memory, |
731 | hwaddr base, |
732 | struct omap_mpu_state_s *mpu) |
733 | { |
734 | memory_region_init_io(&mpu->ulpd_pm_iomem, NULL((void*)0), &omap_ulpd_pm_ops, mpu, |
735 | "omap-ulpd-pm", 0x800); |
736 | memory_region_add_subregion(system_memory, base, &mpu->ulpd_pm_iomem); |
737 | omap_ulpd_pm_reset(mpu); |
738 | } |
739 | |
740 | /* OMAP Pin Configuration */ |
741 | static uint64_t omap_pin_cfg_read(void *opaque, hwaddr addr, |
742 | unsigned size) |
743 | { |
744 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
745 | |
746 | if (size != 4) { |
747 | return omap_badwidth_read32(opaque, addr); |
748 | } |
749 | |
750 | switch (addr) { |
751 | case 0x00: /* FUNC_MUX_CTRL_0 */ |
752 | case 0x04: /* FUNC_MUX_CTRL_1 */ |
753 | case 0x08: /* FUNC_MUX_CTRL_2 */ |
754 | return s->func_mux_ctrl[addr >> 2]; |
755 | |
756 | case 0x0c: /* COMP_MODE_CTRL_0 */ |
757 | return s->comp_mode_ctrl[0]; |
758 | |
759 | case 0x10: /* FUNC_MUX_CTRL_3 */ |
760 | case 0x14: /* FUNC_MUX_CTRL_4 */ |
761 | case 0x18: /* FUNC_MUX_CTRL_5 */ |
762 | case 0x1c: /* FUNC_MUX_CTRL_6 */ |
763 | case 0x20: /* FUNC_MUX_CTRL_7 */ |
764 | case 0x24: /* FUNC_MUX_CTRL_8 */ |
765 | case 0x28: /* FUNC_MUX_CTRL_9 */ |
766 | case 0x2c: /* FUNC_MUX_CTRL_A */ |
767 | case 0x30: /* FUNC_MUX_CTRL_B */ |
768 | case 0x34: /* FUNC_MUX_CTRL_C */ |
769 | case 0x38: /* FUNC_MUX_CTRL_D */ |
770 | return s->func_mux_ctrl[(addr >> 2) - 1]; |
771 | |
772 | case 0x40: /* PULL_DWN_CTRL_0 */ |
773 | case 0x44: /* PULL_DWN_CTRL_1 */ |
774 | case 0x48: /* PULL_DWN_CTRL_2 */ |
775 | case 0x4c: /* PULL_DWN_CTRL_3 */ |
776 | return s->pull_dwn_ctrl[(addr & 0xf) >> 2]; |
777 | |
778 | case 0x50: /* GATE_INH_CTRL_0 */ |
779 | return s->gate_inh_ctrl[0]; |
780 | |
781 | case 0x60: /* VOLTAGE_CTRL_0 */ |
782 | return s->voltage_ctrl[0]; |
783 | |
784 | case 0x70: /* TEST_DBG_CTRL_0 */ |
785 | return s->test_dbg_ctrl[0]; |
786 | |
787 | case 0x80: /* MOD_CONF_CTRL_0 */ |
788 | return s->mod_conf_ctrl[0]; |
789 | } |
790 | |
791 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
792 | return 0; |
793 | } |
794 | |
795 | static inline void omap_pin_funcmux0_update(struct omap_mpu_state_s *s, |
796 | uint32_t diff, uint32_t value) |
797 | { |
798 | if (s->compat1509) { |
799 | if (diff & (1 << 9)) /* BLUETOOTH */ |
800 | omap_clk_onoff(omap_findclk(s, "bt_mclk_out"), |
801 | (~value >> 9) & 1); |
802 | if (diff & (1 << 7)) /* USB.CLKO */ |
803 | omap_clk_onoff(omap_findclk(s, "usb.clko"), |
804 | (value >> 7) & 1); |
805 | } |
806 | } |
807 | |
808 | static inline void omap_pin_funcmux1_update(struct omap_mpu_state_s *s, |
809 | uint32_t diff, uint32_t value) |
810 | { |
811 | if (s->compat1509) { |
812 | if (diff & (1 << 31)) /* MCBSP3_CLK_HIZ_DI */ |
813 | omap_clk_onoff(omap_findclk(s, "mcbsp3.clkx"), |
814 | (value >> 31) & 1); |
815 | if (diff & (1 << 1)) /* CLK32K */ |
816 | omap_clk_onoff(omap_findclk(s, "clk32k_out"), |
817 | (~value >> 1) & 1); |
818 | } |
819 | } |
820 | |
821 | static inline void omap_pin_modconf1_update(struct omap_mpu_state_s *s, |
822 | uint32_t diff, uint32_t value) |
823 | { |
824 | if (diff & (1 << 31)) /* CONF_MOD_UART3_CLK_MODE_R */ |
825 | omap_clk_reparent(omap_findclk(s, "uart3_ck"), |
826 | omap_findclk(s, ((value >> 31) & 1) ? |
827 | "ck_48m" : "armper_ck")); |
828 | if (diff & (1 << 30)) /* CONF_MOD_UART2_CLK_MODE_R */ |
829 | omap_clk_reparent(omap_findclk(s, "uart2_ck"), |
830 | omap_findclk(s, ((value >> 30) & 1) ? |
831 | "ck_48m" : "armper_ck")); |
832 | if (diff & (1 << 29)) /* CONF_MOD_UART1_CLK_MODE_R */ |
833 | omap_clk_reparent(omap_findclk(s, "uart1_ck"), |
834 | omap_findclk(s, ((value >> 29) & 1) ? |
835 | "ck_48m" : "armper_ck")); |
836 | if (diff & (1 << 23)) /* CONF_MOD_MMC_SD_CLK_REQ_R */ |
837 | omap_clk_reparent(omap_findclk(s, "mmc_ck"), |
838 | omap_findclk(s, ((value >> 23) & 1) ? |
839 | "ck_48m" : "armper_ck")); |
840 | if (diff & (1 << 12)) /* CONF_MOD_COM_MCLK_12_48_S */ |
841 | omap_clk_reparent(omap_findclk(s, "com_mclk_out"), |
842 | omap_findclk(s, ((value >> 12) & 1) ? |
843 | "ck_48m" : "armper_ck")); |
844 | if (diff & (1 << 9)) /* CONF_MOD_USB_HOST_HHC_UHO */ |
845 | omap_clk_onoff(omap_findclk(s, "usb_hhc_ck"), (value >> 9) & 1); |
846 | } |
847 | |
848 | static void omap_pin_cfg_write(void *opaque, hwaddr addr, |
849 | uint64_t value, unsigned size) |
850 | { |
851 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
852 | uint32_t diff; |
853 | |
854 | if (size != 4) { |
855 | return omap_badwidth_write32(opaque, addr, value); |
856 | } |
857 | |
858 | switch (addr) { |
859 | case 0x00: /* FUNC_MUX_CTRL_0 */ |
860 | diff = s->func_mux_ctrl[addr >> 2] ^ value; |
861 | s->func_mux_ctrl[addr >> 2] = value; |
862 | omap_pin_funcmux0_update(s, diff, value); |
863 | return; |
864 | |
865 | case 0x04: /* FUNC_MUX_CTRL_1 */ |
866 | diff = s->func_mux_ctrl[addr >> 2] ^ value; |
867 | s->func_mux_ctrl[addr >> 2] = value; |
868 | omap_pin_funcmux1_update(s, diff, value); |
869 | return; |
870 | |
871 | case 0x08: /* FUNC_MUX_CTRL_2 */ |
872 | s->func_mux_ctrl[addr >> 2] = value; |
873 | return; |
874 | |
875 | case 0x0c: /* COMP_MODE_CTRL_0 */ |
876 | s->comp_mode_ctrl[0] = value; |
877 | s->compat1509 = (value != 0x0000eaef); |
878 | omap_pin_funcmux0_update(s, ~0, s->func_mux_ctrl[0]); |
879 | omap_pin_funcmux1_update(s, ~0, s->func_mux_ctrl[1]); |
880 | return; |
881 | |
882 | case 0x10: /* FUNC_MUX_CTRL_3 */ |
883 | case 0x14: /* FUNC_MUX_CTRL_4 */ |
884 | case 0x18: /* FUNC_MUX_CTRL_5 */ |
885 | case 0x1c: /* FUNC_MUX_CTRL_6 */ |
886 | case 0x20: /* FUNC_MUX_CTRL_7 */ |
887 | case 0x24: /* FUNC_MUX_CTRL_8 */ |
888 | case 0x28: /* FUNC_MUX_CTRL_9 */ |
889 | case 0x2c: /* FUNC_MUX_CTRL_A */ |
890 | case 0x30: /* FUNC_MUX_CTRL_B */ |
891 | case 0x34: /* FUNC_MUX_CTRL_C */ |
892 | case 0x38: /* FUNC_MUX_CTRL_D */ |
893 | s->func_mux_ctrl[(addr >> 2) - 1] = value; |
894 | return; |
895 | |
896 | case 0x40: /* PULL_DWN_CTRL_0 */ |
897 | case 0x44: /* PULL_DWN_CTRL_1 */ |
898 | case 0x48: /* PULL_DWN_CTRL_2 */ |
899 | case 0x4c: /* PULL_DWN_CTRL_3 */ |
900 | s->pull_dwn_ctrl[(addr & 0xf) >> 2] = value; |
901 | return; |
902 | |
903 | case 0x50: /* GATE_INH_CTRL_0 */ |
904 | s->gate_inh_ctrl[0] = value; |
905 | return; |
906 | |
907 | case 0x60: /* VOLTAGE_CTRL_0 */ |
908 | s->voltage_ctrl[0] = value; |
909 | return; |
910 | |
911 | case 0x70: /* TEST_DBG_CTRL_0 */ |
912 | s->test_dbg_ctrl[0] = value; |
913 | return; |
914 | |
915 | case 0x80: /* MOD_CONF_CTRL_0 */ |
916 | diff = s->mod_conf_ctrl[0] ^ value; |
917 | s->mod_conf_ctrl[0] = value; |
918 | omap_pin_modconf1_update(s, diff, value); |
919 | return; |
920 | |
921 | default: |
922 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
923 | } |
924 | } |
925 | |
926 | static const MemoryRegionOps omap_pin_cfg_ops = { |
927 | .read = omap_pin_cfg_read, |
928 | .write = omap_pin_cfg_write, |
929 | .endianness = DEVICE_NATIVE_ENDIAN, |
930 | }; |
931 | |
932 | static void omap_pin_cfg_reset(struct omap_mpu_state_s *mpu) |
933 | { |
934 | /* Start in Compatibility Mode. */ |
935 | mpu->compat1509 = 1; |
936 | omap_pin_funcmux0_update(mpu, mpu->func_mux_ctrl[0], 0); |
937 | omap_pin_funcmux1_update(mpu, mpu->func_mux_ctrl[1], 0); |
938 | omap_pin_modconf1_update(mpu, mpu->mod_conf_ctrl[0], 0); |
939 | memset(mpu->func_mux_ctrl, 0, sizeof(mpu->func_mux_ctrl)); |
940 | memset(mpu->comp_mode_ctrl, 0, sizeof(mpu->comp_mode_ctrl)); |
941 | memset(mpu->pull_dwn_ctrl, 0, sizeof(mpu->pull_dwn_ctrl)); |
942 | memset(mpu->gate_inh_ctrl, 0, sizeof(mpu->gate_inh_ctrl)); |
943 | memset(mpu->voltage_ctrl, 0, sizeof(mpu->voltage_ctrl)); |
944 | memset(mpu->test_dbg_ctrl, 0, sizeof(mpu->test_dbg_ctrl)); |
945 | memset(mpu->mod_conf_ctrl, 0, sizeof(mpu->mod_conf_ctrl)); |
946 | } |
947 | |
948 | static void omap_pin_cfg_init(MemoryRegion *system_memory, |
949 | hwaddr base, |
950 | struct omap_mpu_state_s *mpu) |
951 | { |
952 | memory_region_init_io(&mpu->pin_cfg_iomem, NULL((void*)0), &omap_pin_cfg_ops, mpu, |
953 | "omap-pin-cfg", 0x800); |
954 | memory_region_add_subregion(system_memory, base, &mpu->pin_cfg_iomem); |
955 | omap_pin_cfg_reset(mpu); |
956 | } |
957 | |
958 | /* Device Identification, Die Identification */ |
959 | static uint64_t omap_id_read(void *opaque, hwaddr addr, |
960 | unsigned size) |
961 | { |
962 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
963 | |
964 | if (size != 4) { |
965 | return omap_badwidth_read32(opaque, addr); |
966 | } |
967 | |
968 | switch (addr) { |
969 | case 0xfffe1800: /* DIE_ID_LSB */ |
970 | return 0xc9581f0e; |
971 | case 0xfffe1804: /* DIE_ID_MSB */ |
972 | return 0xa8858bfa; |
973 | |
974 | case 0xfffe2000: /* PRODUCT_ID_LSB */ |
975 | return 0x00aaaafc; |
976 | case 0xfffe2004: /* PRODUCT_ID_MSB */ |
977 | return 0xcafeb574; |
978 | |
979 | case 0xfffed400: /* JTAG_ID_LSB */ |
980 | switch (s->mpu_model) { |
981 | case omap310: |
982 | return 0x03310315; |
983 | case omap1510: |
984 | return 0x03310115; |
985 | default: |
986 | hw_error("%s: bad mpu model\n", __FUNCTION__); |
987 | } |
988 | break; |
989 | |
990 | case 0xfffed404: /* JTAG_ID_MSB */ |
991 | switch (s->mpu_model) { |
992 | case omap310: |
993 | return 0xfb57402f; |
994 | case omap1510: |
995 | return 0xfb47002f; |
996 | default: |
997 | hw_error("%s: bad mpu model\n", __FUNCTION__); |
998 | } |
999 | break; |
1000 | } |
1001 | |
1002 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1003 | return 0; |
1004 | } |
1005 | |
1006 | static void omap_id_write(void *opaque, hwaddr addr, |
1007 | uint64_t value, unsigned size) |
1008 | { |
1009 | if (size != 4) { |
1010 | return omap_badwidth_write32(opaque, addr, value); |
1011 | } |
1012 | |
1013 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1014 | } |
1015 | |
1016 | static const MemoryRegionOps omap_id_ops = { |
1017 | .read = omap_id_read, |
1018 | .write = omap_id_write, |
1019 | .endianness = DEVICE_NATIVE_ENDIAN, |
1020 | }; |
1021 | |
1022 | static void omap_id_init(MemoryRegion *memory, struct omap_mpu_state_s *mpu) |
1023 | { |
1024 | memory_region_init_io(&mpu->id_iomem, NULL((void*)0), &omap_id_ops, mpu, |
1025 | "omap-id", 0x100000000ULL); |
1026 | memory_region_init_alias(&mpu->id_iomem_e18, NULL((void*)0), "omap-id-e18", &mpu->id_iomem, |
1027 | 0xfffe1800, 0x800); |
1028 | memory_region_add_subregion(memory, 0xfffe1800, &mpu->id_iomem_e18); |
1029 | memory_region_init_alias(&mpu->id_iomem_ed4, NULL((void*)0), "omap-id-ed4", &mpu->id_iomem, |
1030 | 0xfffed400, 0x100); |
1031 | memory_region_add_subregion(memory, 0xfffed400, &mpu->id_iomem_ed4); |
1032 | if (!cpu_is_omap15xx(mpu)((mpu->mpu_model == omap310) || (mpu->mpu_model == omap1510 ))) { |
1033 | memory_region_init_alias(&mpu->id_iomem_ed4, NULL((void*)0), "omap-id-e20", |
1034 | &mpu->id_iomem, 0xfffe2000, 0x800); |
1035 | memory_region_add_subregion(memory, 0xfffe2000, &mpu->id_iomem_e20); |
1036 | } |
1037 | } |
1038 | |
1039 | /* MPUI Control (Dummy) */ |
1040 | static uint64_t omap_mpui_read(void *opaque, hwaddr addr, |
1041 | unsigned size) |
1042 | { |
1043 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
1044 | |
1045 | if (size != 4) { |
1046 | return omap_badwidth_read32(opaque, addr); |
1047 | } |
1048 | |
1049 | switch (addr) { |
1050 | case 0x00: /* CTRL */ |
1051 | return s->mpui_ctrl; |
1052 | case 0x04: /* DEBUG_ADDR */ |
1053 | return 0x01ffffff; |
1054 | case 0x08: /* DEBUG_DATA */ |
1055 | return 0xffffffff; |
1056 | case 0x0c: /* DEBUG_FLAG */ |
1057 | return 0x00000800; |
1058 | case 0x10: /* STATUS */ |
1059 | return 0x00000000; |
1060 | |
1061 | /* Not in OMAP310 */ |
1062 | case 0x14: /* DSP_STATUS */ |
1063 | case 0x18: /* DSP_BOOT_CONFIG */ |
1064 | return 0x00000000; |
1065 | case 0x1c: /* DSP_MPUI_CONFIG */ |
1066 | return 0x0000ffff; |
1067 | } |
1068 | |
1069 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1070 | return 0; |
1071 | } |
1072 | |
1073 | static void omap_mpui_write(void *opaque, hwaddr addr, |
1074 | uint64_t value, unsigned size) |
1075 | { |
1076 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
1077 | |
1078 | if (size != 4) { |
1079 | return omap_badwidth_write32(opaque, addr, value); |
1080 | } |
1081 | |
1082 | switch (addr) { |
1083 | case 0x00: /* CTRL */ |
1084 | s->mpui_ctrl = value & 0x007fffff; |
1085 | break; |
1086 | |
1087 | case 0x04: /* DEBUG_ADDR */ |
1088 | case 0x08: /* DEBUG_DATA */ |
1089 | case 0x0c: /* DEBUG_FLAG */ |
1090 | case 0x10: /* STATUS */ |
1091 | /* Not in OMAP310 */ |
1092 | case 0x14: /* DSP_STATUS */ |
1093 | OMAP_RO_REG(addr)fprintf(stderr, "%s: Read-only register " "%#08" "l" "x" "\n" , __FUNCTION__, addr); |
1094 | break; |
1095 | case 0x18: /* DSP_BOOT_CONFIG */ |
1096 | case 0x1c: /* DSP_MPUI_CONFIG */ |
1097 | break; |
1098 | |
1099 | default: |
1100 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1101 | } |
1102 | } |
1103 | |
1104 | static const MemoryRegionOps omap_mpui_ops = { |
1105 | .read = omap_mpui_read, |
1106 | .write = omap_mpui_write, |
1107 | .endianness = DEVICE_NATIVE_ENDIAN, |
1108 | }; |
1109 | |
1110 | static void omap_mpui_reset(struct omap_mpu_state_s *s) |
1111 | { |
1112 | s->mpui_ctrl = 0x0003ff1b; |
1113 | } |
1114 | |
1115 | static void omap_mpui_init(MemoryRegion *memory, hwaddr base, |
1116 | struct omap_mpu_state_s *mpu) |
1117 | { |
1118 | memory_region_init_io(&mpu->mpui_iomem, NULL((void*)0), &omap_mpui_ops, mpu, |
1119 | "omap-mpui", 0x100); |
1120 | memory_region_add_subregion(memory, base, &mpu->mpui_iomem); |
1121 | |
1122 | omap_mpui_reset(mpu); |
1123 | } |
1124 | |
1125 | /* TIPB Bridges */ |
1126 | struct omap_tipb_bridge_s { |
1127 | qemu_irq abort; |
1128 | MemoryRegion iomem; |
1129 | |
1130 | int width_intr; |
1131 | uint16_t control; |
1132 | uint16_t alloc; |
1133 | uint16_t buffer; |
1134 | uint16_t enh_control; |
1135 | }; |
1136 | |
1137 | static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, |
1138 | unsigned size) |
1139 | { |
1140 | struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; |
1141 | |
1142 | if (size < 2) { |
1143 | return omap_badwidth_read16(opaque, addr); |
1144 | } |
1145 | |
1146 | switch (addr) { |
1147 | case 0x00: /* TIPB_CNTL */ |
1148 | return s->control; |
1149 | case 0x04: /* TIPB_BUS_ALLOC */ |
1150 | return s->alloc; |
1151 | case 0x08: /* MPU_TIPB_CNTL */ |
1152 | return s->buffer; |
1153 | case 0x0c: /* ENHANCED_TIPB_CNTL */ |
1154 | return s->enh_control; |
1155 | case 0x10: /* ADDRESS_DBG */ |
1156 | case 0x14: /* DATA_DEBUG_LOW */ |
1157 | case 0x18: /* DATA_DEBUG_HIGH */ |
1158 | return 0xffff; |
1159 | case 0x1c: /* DEBUG_CNTR_SIG */ |
1160 | return 0x00f8; |
1161 | } |
1162 | |
1163 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1164 | return 0; |
1165 | } |
1166 | |
1167 | static void omap_tipb_bridge_write(void *opaque, hwaddr addr, |
1168 | uint64_t value, unsigned size) |
1169 | { |
1170 | struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; |
1171 | |
1172 | if (size < 2) { |
1173 | return omap_badwidth_write16(opaque, addr, value); |
1174 | } |
1175 | |
1176 | switch (addr) { |
1177 | case 0x00: /* TIPB_CNTL */ |
1178 | s->control = value & 0xffff; |
1179 | break; |
1180 | |
1181 | case 0x04: /* TIPB_BUS_ALLOC */ |
1182 | s->alloc = value & 0x003f; |
1183 | break; |
1184 | |
1185 | case 0x08: /* MPU_TIPB_CNTL */ |
1186 | s->buffer = value & 0x0003; |
1187 | break; |
1188 | |
1189 | case 0x0c: /* ENHANCED_TIPB_CNTL */ |
1190 | s->width_intr = !(value & 2); |
1191 | s->enh_control = value & 0x000f; |
1192 | break; |
1193 | |
1194 | case 0x10: /* ADDRESS_DBG */ |
1195 | case 0x14: /* DATA_DEBUG_LOW */ |
1196 | case 0x18: /* DATA_DEBUG_HIGH */ |
1197 | case 0x1c: /* DEBUG_CNTR_SIG */ |
1198 | OMAP_RO_REG(addr)fprintf(stderr, "%s: Read-only register " "%#08" "l" "x" "\n" , __FUNCTION__, addr); |
1199 | break; |
1200 | |
1201 | default: |
1202 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1203 | } |
1204 | } |
1205 | |
1206 | static const MemoryRegionOps omap_tipb_bridge_ops = { |
1207 | .read = omap_tipb_bridge_read, |
1208 | .write = omap_tipb_bridge_write, |
1209 | .endianness = DEVICE_NATIVE_ENDIAN, |
1210 | }; |
1211 | |
1212 | static void omap_tipb_bridge_reset(struct omap_tipb_bridge_s *s) |
1213 | { |
1214 | s->control = 0xffff; |
1215 | s->alloc = 0x0009; |
1216 | s->buffer = 0x0000; |
1217 | s->enh_control = 0x000f; |
1218 | } |
1219 | |
1220 | static struct omap_tipb_bridge_s *omap_tipb_bridge_init( |
1221 | MemoryRegion *memory, hwaddr base, |
1222 | qemu_irq abort_irq, omap_clk clk) |
1223 | { |
1224 | struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) |
1225 | g_malloc0(sizeof(struct omap_tipb_bridge_s)); |
1226 | |
1227 | s->abort = abort_irq; |
1228 | omap_tipb_bridge_reset(s); |
1229 | |
1230 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_tipb_bridge_ops, s, |
1231 | "omap-tipb-bridge", 0x100); |
1232 | memory_region_add_subregion(memory, base, &s->iomem); |
1233 | |
1234 | return s; |
1235 | } |
1236 | |
1237 | /* Dummy Traffic Controller's Memory Interface */ |
1238 | static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, |
1239 | unsigned size) |
1240 | { |
1241 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
1242 | uint32_t ret; |
1243 | |
1244 | if (size != 4) { |
1245 | return omap_badwidth_read32(opaque, addr); |
1246 | } |
1247 | |
1248 | switch (addr) { |
1249 | case 0x00: /* IMIF_PRIO */ |
1250 | case 0x04: /* EMIFS_PRIO */ |
1251 | case 0x08: /* EMIFF_PRIO */ |
1252 | case 0x0c: /* EMIFS_CONFIG */ |
1253 | case 0x10: /* EMIFS_CS0_CONFIG */ |
1254 | case 0x14: /* EMIFS_CS1_CONFIG */ |
1255 | case 0x18: /* EMIFS_CS2_CONFIG */ |
1256 | case 0x1c: /* EMIFS_CS3_CONFIG */ |
1257 | case 0x24: /* EMIFF_MRS */ |
1258 | case 0x28: /* TIMEOUT1 */ |
1259 | case 0x2c: /* TIMEOUT2 */ |
1260 | case 0x30: /* TIMEOUT3 */ |
1261 | case 0x3c: /* EMIFF_SDRAM_CONFIG_2 */ |
1262 | case 0x40: /* EMIFS_CFG_DYN_WAIT */ |
1263 | return s->tcmi_regs[addr >> 2]; |
1264 | |
1265 | case 0x20: /* EMIFF_SDRAM_CONFIG */ |
1266 | ret = s->tcmi_regs[addr >> 2]; |
1267 | s->tcmi_regs[addr >> 2] &= ~1; /* XXX: Clear SLRF on SDRAM access */ |
1268 | /* XXX: We can try using the VGA_DIRTY flag for this */ |
1269 | return ret; |
1270 | } |
1271 | |
1272 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1273 | return 0; |
1274 | } |
1275 | |
1276 | static void omap_tcmi_write(void *opaque, hwaddr addr, |
1277 | uint64_t value, unsigned size) |
1278 | { |
1279 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
1280 | |
1281 | if (size != 4) { |
1282 | return omap_badwidth_write32(opaque, addr, value); |
1283 | } |
1284 | |
1285 | switch (addr) { |
1286 | case 0x00: /* IMIF_PRIO */ |
1287 | case 0x04: /* EMIFS_PRIO */ |
1288 | case 0x08: /* EMIFF_PRIO */ |
1289 | case 0x10: /* EMIFS_CS0_CONFIG */ |
1290 | case 0x14: /* EMIFS_CS1_CONFIG */ |
1291 | case 0x18: /* EMIFS_CS2_CONFIG */ |
1292 | case 0x1c: /* EMIFS_CS3_CONFIG */ |
1293 | case 0x20: /* EMIFF_SDRAM_CONFIG */ |
1294 | case 0x24: /* EMIFF_MRS */ |
1295 | case 0x28: /* TIMEOUT1 */ |
1296 | case 0x2c: /* TIMEOUT2 */ |
1297 | case 0x30: /* TIMEOUT3 */ |
1298 | case 0x3c: /* EMIFF_SDRAM_CONFIG_2 */ |
1299 | case 0x40: /* EMIFS_CFG_DYN_WAIT */ |
1300 | s->tcmi_regs[addr >> 2] = value; |
1301 | break; |
1302 | case 0x0c: /* EMIFS_CONFIG */ |
1303 | s->tcmi_regs[addr >> 2] = (value & 0xf) | (1 << 4); |
1304 | break; |
1305 | |
1306 | default: |
1307 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1308 | } |
1309 | } |
1310 | |
1311 | static const MemoryRegionOps omap_tcmi_ops = { |
1312 | .read = omap_tcmi_read, |
1313 | .write = omap_tcmi_write, |
1314 | .endianness = DEVICE_NATIVE_ENDIAN, |
1315 | }; |
1316 | |
1317 | static void omap_tcmi_reset(struct omap_mpu_state_s *mpu) |
1318 | { |
1319 | mpu->tcmi_regs[0x00 >> 2] = 0x00000000; |
1320 | mpu->tcmi_regs[0x04 >> 2] = 0x00000000; |
1321 | mpu->tcmi_regs[0x08 >> 2] = 0x00000000; |
1322 | mpu->tcmi_regs[0x0c >> 2] = 0x00000010; |
1323 | mpu->tcmi_regs[0x10 >> 2] = 0x0010fffb; |
1324 | mpu->tcmi_regs[0x14 >> 2] = 0x0010fffb; |
1325 | mpu->tcmi_regs[0x18 >> 2] = 0x0010fffb; |
1326 | mpu->tcmi_regs[0x1c >> 2] = 0x0010fffb; |
1327 | mpu->tcmi_regs[0x20 >> 2] = 0x00618800; |
1328 | mpu->tcmi_regs[0x24 >> 2] = 0x00000037; |
1329 | mpu->tcmi_regs[0x28 >> 2] = 0x00000000; |
1330 | mpu->tcmi_regs[0x2c >> 2] = 0x00000000; |
1331 | mpu->tcmi_regs[0x30 >> 2] = 0x00000000; |
1332 | mpu->tcmi_regs[0x3c >> 2] = 0x00000003; |
1333 | mpu->tcmi_regs[0x40 >> 2] = 0x00000000; |
1334 | } |
1335 | |
1336 | static void omap_tcmi_init(MemoryRegion *memory, hwaddr base, |
1337 | struct omap_mpu_state_s *mpu) |
1338 | { |
1339 | memory_region_init_io(&mpu->tcmi_iomem, NULL((void*)0), &omap_tcmi_ops, mpu, |
1340 | "omap-tcmi", 0x100); |
1341 | memory_region_add_subregion(memory, base, &mpu->tcmi_iomem); |
1342 | omap_tcmi_reset(mpu); |
1343 | } |
1344 | |
1345 | /* Digital phase-locked loops control */ |
1346 | struct dpll_ctl_s { |
1347 | MemoryRegion iomem; |
1348 | uint16_t mode; |
1349 | omap_clk dpll; |
1350 | }; |
1351 | |
1352 | static uint64_t omap_dpll_read(void *opaque, hwaddr addr, |
1353 | unsigned size) |
1354 | { |
1355 | struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; |
1356 | |
1357 | if (size != 2) { |
1358 | return omap_badwidth_read16(opaque, addr); |
1359 | } |
1360 | |
1361 | if (addr == 0x00) /* CTL_REG */ |
1362 | return s->mode; |
1363 | |
1364 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1365 | return 0; |
1366 | } |
1367 | |
1368 | static void omap_dpll_write(void *opaque, hwaddr addr, |
1369 | uint64_t value, unsigned size) |
1370 | { |
1371 | struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; |
1372 | uint16_t diff; |
1373 | static const int bypass_div[4] = { 1, 2, 4, 4 }; |
1374 | int div, mult; |
1375 | |
1376 | if (size != 2) { |
1377 | return omap_badwidth_write16(opaque, addr, value); |
1378 | } |
1379 | |
1380 | if (addr == 0x00) { /* CTL_REG */ |
1381 | /* See omap_ulpd_pm_write() too */ |
1382 | diff = s->mode & value; |
1383 | s->mode = value & 0x2fff; |
1384 | if (diff & (0x3ff << 2)) { |
1385 | if (value & (1 << 4)) { /* PLL_ENABLE */ |
1386 | div = ((value >> 5) & 3) + 1; /* PLL_DIV */ |
1387 | mult = MIN((value >> 7) & 0x1f, 1)((((value >> 7) & 0x1f) < (1)) ? ((value >> 7) & 0x1f) : (1)); /* PLL_MULT */ |
1388 | } else { |
1389 | div = bypass_div[((value >> 2) & 3)]; /* BYPASS_DIV */ |
1390 | mult = 1; |
1391 | } |
1392 | omap_clk_setrate(s->dpll, div, mult); |
1393 | } |
1394 | |
1395 | /* Enter the desired mode. */ |
1396 | s->mode = (s->mode & 0xfffe) | ((s->mode >> 4) & 1); |
1397 | |
1398 | /* Act as if the lock is restored. */ |
1399 | s->mode |= 2; |
1400 | } else { |
1401 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1402 | } |
1403 | } |
1404 | |
1405 | static const MemoryRegionOps omap_dpll_ops = { |
1406 | .read = omap_dpll_read, |
1407 | .write = omap_dpll_write, |
1408 | .endianness = DEVICE_NATIVE_ENDIAN, |
1409 | }; |
1410 | |
1411 | static void omap_dpll_reset(struct dpll_ctl_s *s) |
1412 | { |
1413 | s->mode = 0x2002; |
1414 | omap_clk_setrate(s->dpll, 1, 1); |
1415 | } |
1416 | |
1417 | static struct dpll_ctl_s *omap_dpll_init(MemoryRegion *memory, |
1418 | hwaddr base, omap_clk clk) |
1419 | { |
1420 | struct dpll_ctl_s *s = g_malloc0(sizeof(*s)); |
1421 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_dpll_ops, s, "omap-dpll", 0x100); |
1422 | |
1423 | s->dpll = clk; |
1424 | omap_dpll_reset(s); |
1425 | |
1426 | memory_region_add_subregion(memory, base, &s->iomem); |
1427 | return s; |
1428 | } |
1429 | |
1430 | /* MPU Clock/Reset/Power Mode Control */ |
1431 | static uint64_t omap_clkm_read(void *opaque, hwaddr addr, |
1432 | unsigned size) |
1433 | { |
1434 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
1435 | |
1436 | if (size != 2) { |
1437 | return omap_badwidth_read16(opaque, addr); |
1438 | } |
1439 | |
1440 | switch (addr) { |
1441 | case 0x00: /* ARM_CKCTL */ |
1442 | return s->clkm.arm_ckctl; |
1443 | |
1444 | case 0x04: /* ARM_IDLECT1 */ |
1445 | return s->clkm.arm_idlect1; |
1446 | |
1447 | case 0x08: /* ARM_IDLECT2 */ |
1448 | return s->clkm.arm_idlect2; |
1449 | |
1450 | case 0x0c: /* ARM_EWUPCT */ |
1451 | return s->clkm.arm_ewupct; |
1452 | |
1453 | case 0x10: /* ARM_RSTCT1 */ |
1454 | return s->clkm.arm_rstct1; |
1455 | |
1456 | case 0x14: /* ARM_RSTCT2 */ |
1457 | return s->clkm.arm_rstct2; |
1458 | |
1459 | case 0x18: /* ARM_SYSST */ |
1460 | return (s->clkm.clocking_scheme << 11) | s->clkm.cold_start; |
1461 | |
1462 | case 0x1c: /* ARM_CKOUT1 */ |
1463 | return s->clkm.arm_ckout1; |
1464 | |
1465 | case 0x20: /* ARM_CKOUT2 */ |
1466 | break; |
1467 | } |
1468 | |
1469 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1470 | return 0; |
1471 | } |
1472 | |
1473 | static inline void omap_clkm_ckctl_update(struct omap_mpu_state_s *s, |
1474 | uint16_t diff, uint16_t value) |
1475 | { |
1476 | omap_clk clk; |
1477 | |
1478 | if (diff & (1 << 14)) { /* ARM_INTHCK_SEL */ |
1479 | if (value & (1 << 14)) |
1480 | /* Reserved */; |
1481 | else { |
1482 | clk = omap_findclk(s, "arminth_ck"); |
1483 | omap_clk_reparent(clk, omap_findclk(s, "tc_ck")); |
1484 | } |
1485 | } |
1486 | if (diff & (1 << 12)) { /* ARM_TIMXO */ |
1487 | clk = omap_findclk(s, "armtim_ck"); |
1488 | if (value & (1 << 12)) |
1489 | omap_clk_reparent(clk, omap_findclk(s, "clkin")); |
1490 | else |
1491 | omap_clk_reparent(clk, omap_findclk(s, "ck_gen1")); |
1492 | } |
1493 | /* XXX: en_dspck */ |
1494 | if (diff & (3 << 10)) { /* DSPMMUDIV */ |
1495 | clk = omap_findclk(s, "dspmmu_ck"); |
1496 | omap_clk_setrate(clk, 1 << ((value >> 10) & 3), 1); |
1497 | } |
1498 | if (diff & (3 << 8)) { /* TCDIV */ |
1499 | clk = omap_findclk(s, "tc_ck"); |
1500 | omap_clk_setrate(clk, 1 << ((value >> 8) & 3), 1); |
1501 | } |
1502 | if (diff & (3 << 6)) { /* DSPDIV */ |
1503 | clk = omap_findclk(s, "dsp_ck"); |
1504 | omap_clk_setrate(clk, 1 << ((value >> 6) & 3), 1); |
1505 | } |
1506 | if (diff & (3 << 4)) { /* ARMDIV */ |
1507 | clk = omap_findclk(s, "arm_ck"); |
1508 | omap_clk_setrate(clk, 1 << ((value >> 4) & 3), 1); |
1509 | } |
1510 | if (diff & (3 << 2)) { /* LCDDIV */ |
1511 | clk = omap_findclk(s, "lcd_ck"); |
1512 | omap_clk_setrate(clk, 1 << ((value >> 2) & 3), 1); |
1513 | } |
1514 | if (diff & (3 << 0)) { /* PERDIV */ |
1515 | clk = omap_findclk(s, "armper_ck"); |
1516 | omap_clk_setrate(clk, 1 << ((value >> 0) & 3), 1); |
1517 | } |
1518 | } |
1519 | |
1520 | static inline void omap_clkm_idlect1_update(struct omap_mpu_state_s *s, |
1521 | uint16_t diff, uint16_t value) |
1522 | { |
1523 | omap_clk clk; |
1524 | |
1525 | if (value & (1 << 11)) { /* SETARM_IDLE */ |
1526 | cpu_interrupt(CPU(s->cpu)((CPUState *)object_dynamic_cast_assert(((Object *)((s->cpu ))), ("cpu"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 1526, __func__)), CPU_INTERRUPT_HALT0x0020); |
1527 | } |
1528 | if (!(value & (1 << 10))) /* WKUP_MODE */ |
1529 | qemu_system_shutdown_request(); /* XXX: disable wakeup from IRQ */ |
1530 | |
1531 | #define SET_CANIDLE(clock, bit)if (diff & (1 << bit)) { clk = omap_findclk(s, clock ); omap_clk_canidle(clk, (value >> bit) & 1); } \ |
1532 | if (diff & (1 << bit)) { \ |
1533 | clk = omap_findclk(s, clock); \ |
1534 | omap_clk_canidle(clk, (value >> bit) & 1); \ |
1535 | } |
1536 | SET_CANIDLE("mpuwd_ck", 0)if (diff & (1 << 0)) { clk = omap_findclk(s, "mpuwd_ck" ); omap_clk_canidle(clk, (value >> 0) & 1); } /* IDLWDT_ARM */ |
1537 | SET_CANIDLE("armxor_ck", 1)if (diff & (1 << 1)) { clk = omap_findclk(s, "armxor_ck" ); omap_clk_canidle(clk, (value >> 1) & 1); } /* IDLXORP_ARM */ |
1538 | SET_CANIDLE("mpuper_ck", 2)if (diff & (1 << 2)) { clk = omap_findclk(s, "mpuper_ck" ); omap_clk_canidle(clk, (value >> 2) & 1); } /* IDLPER_ARM */ |
1539 | SET_CANIDLE("lcd_ck", 3)if (diff & (1 << 3)) { clk = omap_findclk(s, "lcd_ck" ); omap_clk_canidle(clk, (value >> 3) & 1); } /* IDLLCD_ARM */ |
1540 | SET_CANIDLE("lb_ck", 4)if (diff & (1 << 4)) { clk = omap_findclk(s, "lb_ck" ); omap_clk_canidle(clk, (value >> 4) & 1); } /* IDLLB_ARM */ |
1541 | SET_CANIDLE("hsab_ck", 5)if (diff & (1 << 5)) { clk = omap_findclk(s, "hsab_ck" ); omap_clk_canidle(clk, (value >> 5) & 1); } /* IDLHSAB_ARM */ |
1542 | SET_CANIDLE("tipb_ck", 6)if (diff & (1 << 6)) { clk = omap_findclk(s, "tipb_ck" ); omap_clk_canidle(clk, (value >> 6) & 1); } /* IDLIF_ARM */ |
1543 | SET_CANIDLE("dma_ck", 6)if (diff & (1 << 6)) { clk = omap_findclk(s, "dma_ck" ); omap_clk_canidle(clk, (value >> 6) & 1); } /* IDLIF_ARM */ |
1544 | SET_CANIDLE("tc_ck", 6)if (diff & (1 << 6)) { clk = omap_findclk(s, "tc_ck" ); omap_clk_canidle(clk, (value >> 6) & 1); } /* IDLIF_ARM */ |
1545 | SET_CANIDLE("dpll1", 7)if (diff & (1 << 7)) { clk = omap_findclk(s, "dpll1" ); omap_clk_canidle(clk, (value >> 7) & 1); } /* IDLDPLL_ARM */ |
1546 | SET_CANIDLE("dpll2", 7)if (diff & (1 << 7)) { clk = omap_findclk(s, "dpll2" ); omap_clk_canidle(clk, (value >> 7) & 1); } /* IDLDPLL_ARM */ |
1547 | SET_CANIDLE("dpll3", 7)if (diff & (1 << 7)) { clk = omap_findclk(s, "dpll3" ); omap_clk_canidle(clk, (value >> 7) & 1); } /* IDLDPLL_ARM */ |
1548 | SET_CANIDLE("mpui_ck", 8)if (diff & (1 << 8)) { clk = omap_findclk(s, "mpui_ck" ); omap_clk_canidle(clk, (value >> 8) & 1); } /* IDLAPI_ARM */ |
1549 | SET_CANIDLE("armtim_ck", 9)if (diff & (1 << 9)) { clk = omap_findclk(s, "armtim_ck" ); omap_clk_canidle(clk, (value >> 9) & 1); } /* IDLTIM_ARM */ |
1550 | } |
1551 | |
1552 | static inline void omap_clkm_idlect2_update(struct omap_mpu_state_s *s, |
1553 | uint16_t diff, uint16_t value) |
1554 | { |
1555 | omap_clk clk; |
1556 | |
1557 | #define SET_ONOFF(clock, bit)if (diff & (1 << bit)) { clk = omap_findclk(s, clock ); omap_clk_onoff(clk, (value >> bit) & 1); } \ |
1558 | if (diff & (1 << bit)) { \ |
1559 | clk = omap_findclk(s, clock); \ |
1560 | omap_clk_onoff(clk, (value >> bit) & 1); \ |
1561 | } |
1562 | SET_ONOFF("mpuwd_ck", 0)if (diff & (1 << 0)) { clk = omap_findclk(s, "mpuwd_ck" ); omap_clk_onoff(clk, (value >> 0) & 1); } /* EN_WDTCK */ |
1563 | SET_ONOFF("armxor_ck", 1)if (diff & (1 << 1)) { clk = omap_findclk(s, "armxor_ck" ); omap_clk_onoff(clk, (value >> 1) & 1); } /* EN_XORPCK */ |
1564 | SET_ONOFF("mpuper_ck", 2)if (diff & (1 << 2)) { clk = omap_findclk(s, "mpuper_ck" ); omap_clk_onoff(clk, (value >> 2) & 1); } /* EN_PERCK */ |
1565 | SET_ONOFF("lcd_ck", 3)if (diff & (1 << 3)) { clk = omap_findclk(s, "lcd_ck" ); omap_clk_onoff(clk, (value >> 3) & 1); } /* EN_LCDCK */ |
1566 | SET_ONOFF("lb_ck", 4)if (diff & (1 << 4)) { clk = omap_findclk(s, "lb_ck" ); omap_clk_onoff(clk, (value >> 4) & 1); } /* EN_LBCK */ |
1567 | SET_ONOFF("hsab_ck", 5)if (diff & (1 << 5)) { clk = omap_findclk(s, "hsab_ck" ); omap_clk_onoff(clk, (value >> 5) & 1); } /* EN_HSABCK */ |
1568 | SET_ONOFF("mpui_ck", 6)if (diff & (1 << 6)) { clk = omap_findclk(s, "mpui_ck" ); omap_clk_onoff(clk, (value >> 6) & 1); } /* EN_APICK */ |
1569 | SET_ONOFF("armtim_ck", 7)if (diff & (1 << 7)) { clk = omap_findclk(s, "armtim_ck" ); omap_clk_onoff(clk, (value >> 7) & 1); } /* EN_TIMCK */ |
1570 | SET_CANIDLE("dma_ck", 8)if (diff & (1 << 8)) { clk = omap_findclk(s, "dma_ck" ); omap_clk_canidle(clk, (value >> 8) & 1); } /* DMACK_REQ */ |
1571 | SET_ONOFF("arm_gpio_ck", 9)if (diff & (1 << 9)) { clk = omap_findclk(s, "arm_gpio_ck" ); omap_clk_onoff(clk, (value >> 9) & 1); } /* EN_GPIOCK */ |
1572 | SET_ONOFF("lbfree_ck", 10)if (diff & (1 << 10)) { clk = omap_findclk(s, "lbfree_ck" ); omap_clk_onoff(clk, (value >> 10) & 1); } /* EN_LBFREECK */ |
1573 | } |
1574 | |
1575 | static inline void omap_clkm_ckout1_update(struct omap_mpu_state_s *s, |
1576 | uint16_t diff, uint16_t value) |
1577 | { |
1578 | omap_clk clk; |
1579 | |
1580 | if (diff & (3 << 4)) { /* TCLKOUT */ |
1581 | clk = omap_findclk(s, "tclk_out"); |
1582 | switch ((value >> 4) & 3) { |
1583 | case 1: |
1584 | omap_clk_reparent(clk, omap_findclk(s, "ck_gen3")); |
1585 | omap_clk_onoff(clk, 1); |
1586 | break; |
1587 | case 2: |
1588 | omap_clk_reparent(clk, omap_findclk(s, "tc_ck")); |
1589 | omap_clk_onoff(clk, 1); |
1590 | break; |
1591 | default: |
1592 | omap_clk_onoff(clk, 0); |
1593 | } |
1594 | } |
1595 | if (diff & (3 << 2)) { /* DCLKOUT */ |
1596 | clk = omap_findclk(s, "dclk_out"); |
1597 | switch ((value >> 2) & 3) { |
1598 | case 0: |
1599 | omap_clk_reparent(clk, omap_findclk(s, "dspmmu_ck")); |
1600 | break; |
1601 | case 1: |
1602 | omap_clk_reparent(clk, omap_findclk(s, "ck_gen2")); |
1603 | break; |
1604 | case 2: |
1605 | omap_clk_reparent(clk, omap_findclk(s, "dsp_ck")); |
1606 | break; |
1607 | case 3: |
1608 | omap_clk_reparent(clk, omap_findclk(s, "ck_ref14")); |
1609 | break; |
1610 | } |
1611 | } |
1612 | if (diff & (3 << 0)) { /* ACLKOUT */ |
1613 | clk = omap_findclk(s, "aclk_out"); |
1614 | switch ((value >> 0) & 3) { |
1615 | case 1: |
1616 | omap_clk_reparent(clk, omap_findclk(s, "ck_gen1")); |
1617 | omap_clk_onoff(clk, 1); |
1618 | break; |
1619 | case 2: |
1620 | omap_clk_reparent(clk, omap_findclk(s, "arm_ck")); |
1621 | omap_clk_onoff(clk, 1); |
1622 | break; |
1623 | case 3: |
1624 | omap_clk_reparent(clk, omap_findclk(s, "ck_ref14")); |
1625 | omap_clk_onoff(clk, 1); |
1626 | break; |
1627 | default: |
1628 | omap_clk_onoff(clk, 0); |
1629 | } |
1630 | } |
1631 | } |
1632 | |
1633 | static void omap_clkm_write(void *opaque, hwaddr addr, |
1634 | uint64_t value, unsigned size) |
1635 | { |
1636 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
1637 | uint16_t diff; |
1638 | omap_clk clk; |
1639 | static const char *clkschemename[8] = { |
1640 | "fully synchronous", "fully asynchronous", "synchronous scalable", |
1641 | "mix mode 1", "mix mode 2", "bypass mode", "mix mode 3", "mix mode 4", |
1642 | }; |
1643 | |
1644 | if (size != 2) { |
1645 | return omap_badwidth_write16(opaque, addr, value); |
1646 | } |
1647 | |
1648 | switch (addr) { |
1649 | case 0x00: /* ARM_CKCTL */ |
1650 | diff = s->clkm.arm_ckctl ^ value; |
1651 | s->clkm.arm_ckctl = value & 0x7fff; |
1652 | omap_clkm_ckctl_update(s, diff, value); |
1653 | return; |
1654 | |
1655 | case 0x04: /* ARM_IDLECT1 */ |
1656 | diff = s->clkm.arm_idlect1 ^ value; |
1657 | s->clkm.arm_idlect1 = value & 0x0fff; |
1658 | omap_clkm_idlect1_update(s, diff, value); |
1659 | return; |
1660 | |
1661 | case 0x08: /* ARM_IDLECT2 */ |
1662 | diff = s->clkm.arm_idlect2 ^ value; |
1663 | s->clkm.arm_idlect2 = value & 0x07ff; |
1664 | omap_clkm_idlect2_update(s, diff, value); |
1665 | return; |
1666 | |
1667 | case 0x0c: /* ARM_EWUPCT */ |
1668 | s->clkm.arm_ewupct = value & 0x003f; |
1669 | return; |
1670 | |
1671 | case 0x10: /* ARM_RSTCT1 */ |
1672 | diff = s->clkm.arm_rstct1 ^ value; |
1673 | s->clkm.arm_rstct1 = value & 0x0007; |
1674 | if (value & 9) { |
1675 | qemu_system_reset_request(); |
1676 | s->clkm.cold_start = 0xa; |
1677 | } |
1678 | if (diff & ~value & 4) { /* DSP_RST */ |
1679 | omap_mpui_reset(s); |
1680 | omap_tipb_bridge_reset(s->private_tipb); |
1681 | omap_tipb_bridge_reset(s->public_tipb); |
1682 | } |
1683 | if (diff & 2) { /* DSP_EN */ |
1684 | clk = omap_findclk(s, "dsp_ck"); |
1685 | omap_clk_canidle(clk, (~value >> 1) & 1); |
1686 | } |
1687 | return; |
1688 | |
1689 | case 0x14: /* ARM_RSTCT2 */ |
1690 | s->clkm.arm_rstct2 = value & 0x0001; |
1691 | return; |
1692 | |
1693 | case 0x18: /* ARM_SYSST */ |
1694 | if ((s->clkm.clocking_scheme ^ (value >> 11)) & 7) { |
1695 | s->clkm.clocking_scheme = (value >> 11) & 7; |
1696 | printf("%s: clocking scheme set to %s\n", __FUNCTION__, |
1697 | clkschemename[s->clkm.clocking_scheme]); |
1698 | } |
1699 | s->clkm.cold_start &= value & 0x3f; |
1700 | return; |
1701 | |
1702 | case 0x1c: /* ARM_CKOUT1 */ |
1703 | diff = s->clkm.arm_ckout1 ^ value; |
1704 | s->clkm.arm_ckout1 = value & 0x003f; |
1705 | omap_clkm_ckout1_update(s, diff, value); |
1706 | return; |
1707 | |
1708 | case 0x20: /* ARM_CKOUT2 */ |
1709 | default: |
1710 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1711 | } |
1712 | } |
1713 | |
1714 | static const MemoryRegionOps omap_clkm_ops = { |
1715 | .read = omap_clkm_read, |
1716 | .write = omap_clkm_write, |
1717 | .endianness = DEVICE_NATIVE_ENDIAN, |
1718 | }; |
1719 | |
1720 | static uint64_t omap_clkdsp_read(void *opaque, hwaddr addr, |
1721 | unsigned size) |
1722 | { |
1723 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
1724 | CPUState *cpu = CPU(s->cpu)((CPUState *)object_dynamic_cast_assert(((Object *)((s->cpu ))), ("cpu"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 1724, __func__)); |
Value stored to 'cpu' during its initialization is never read | |
1725 | |
1726 | if (size != 2) { |
1727 | return omap_badwidth_read16(opaque, addr); |
1728 | } |
1729 | |
1730 | switch (addr) { |
1731 | case 0x04: /* DSP_IDLECT1 */ |
1732 | return s->clkm.dsp_idlect1; |
1733 | |
1734 | case 0x08: /* DSP_IDLECT2 */ |
1735 | return s->clkm.dsp_idlect2; |
1736 | |
1737 | case 0x14: /* DSP_RSTCT2 */ |
1738 | return s->clkm.dsp_rstct2; |
1739 | |
1740 | case 0x18: /* DSP_SYSST */ |
1741 | cpu = CPU(s->cpu)((CPUState *)object_dynamic_cast_assert(((Object *)((s->cpu ))), ("cpu"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 1741, __func__)); |
1742 | return (s->clkm.clocking_scheme << 11) | s->clkm.cold_start | |
1743 | (cpu->halted << 6); /* Quite useless... */ |
1744 | } |
1745 | |
1746 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1747 | return 0; |
1748 | } |
1749 | |
1750 | static inline void omap_clkdsp_idlect1_update(struct omap_mpu_state_s *s, |
1751 | uint16_t diff, uint16_t value) |
1752 | { |
1753 | omap_clk clk; |
1754 | |
1755 | SET_CANIDLE("dspxor_ck", 1)if (diff & (1 << 1)) { clk = omap_findclk(s, "dspxor_ck" ); omap_clk_canidle(clk, (value >> 1) & 1); }; /* IDLXORP_DSP */ |
1756 | } |
1757 | |
1758 | static inline void omap_clkdsp_idlect2_update(struct omap_mpu_state_s *s, |
1759 | uint16_t diff, uint16_t value) |
1760 | { |
1761 | omap_clk clk; |
1762 | |
1763 | SET_ONOFF("dspxor_ck", 1)if (diff & (1 << 1)) { clk = omap_findclk(s, "dspxor_ck" ); omap_clk_onoff(clk, (value >> 1) & 1); }; /* EN_XORPCK */ |
1764 | } |
1765 | |
1766 | static void omap_clkdsp_write(void *opaque, hwaddr addr, |
1767 | uint64_t value, unsigned size) |
1768 | { |
1769 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; |
1770 | uint16_t diff; |
1771 | |
1772 | if (size != 2) { |
1773 | return omap_badwidth_write16(opaque, addr, value); |
1774 | } |
1775 | |
1776 | switch (addr) { |
1777 | case 0x04: /* DSP_IDLECT1 */ |
1778 | diff = s->clkm.dsp_idlect1 ^ value; |
1779 | s->clkm.dsp_idlect1 = value & 0x01f7; |
1780 | omap_clkdsp_idlect1_update(s, diff, value); |
1781 | break; |
1782 | |
1783 | case 0x08: /* DSP_IDLECT2 */ |
1784 | s->clkm.dsp_idlect2 = value & 0x0037; |
1785 | diff = s->clkm.dsp_idlect1 ^ value; |
1786 | omap_clkdsp_idlect2_update(s, diff, value); |
1787 | break; |
1788 | |
1789 | case 0x14: /* DSP_RSTCT2 */ |
1790 | s->clkm.dsp_rstct2 = value & 0x0001; |
1791 | break; |
1792 | |
1793 | case 0x18: /* DSP_SYSST */ |
1794 | s->clkm.cold_start &= value & 0x3f; |
1795 | break; |
1796 | |
1797 | default: |
1798 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1799 | } |
1800 | } |
1801 | |
1802 | static const MemoryRegionOps omap_clkdsp_ops = { |
1803 | .read = omap_clkdsp_read, |
1804 | .write = omap_clkdsp_write, |
1805 | .endianness = DEVICE_NATIVE_ENDIAN, |
1806 | }; |
1807 | |
1808 | static void omap_clkm_reset(struct omap_mpu_state_s *s) |
1809 | { |
1810 | if (s->wdt && s->wdt->reset) |
1811 | s->clkm.cold_start = 0x6; |
1812 | s->clkm.clocking_scheme = 0; |
1813 | omap_clkm_ckctl_update(s, ~0, 0x3000); |
1814 | s->clkm.arm_ckctl = 0x3000; |
1815 | omap_clkm_idlect1_update(s, s->clkm.arm_idlect1 ^ 0x0400, 0x0400); |
1816 | s->clkm.arm_idlect1 = 0x0400; |
1817 | omap_clkm_idlect2_update(s, s->clkm.arm_idlect2 ^ 0x0100, 0x0100); |
1818 | s->clkm.arm_idlect2 = 0x0100; |
1819 | s->clkm.arm_ewupct = 0x003f; |
1820 | s->clkm.arm_rstct1 = 0x0000; |
1821 | s->clkm.arm_rstct2 = 0x0000; |
1822 | s->clkm.arm_ckout1 = 0x0015; |
1823 | s->clkm.dpll1_mode = 0x2002; |
1824 | omap_clkdsp_idlect1_update(s, s->clkm.dsp_idlect1 ^ 0x0040, 0x0040); |
1825 | s->clkm.dsp_idlect1 = 0x0040; |
1826 | omap_clkdsp_idlect2_update(s, ~0, 0x0000); |
1827 | s->clkm.dsp_idlect2 = 0x0000; |
1828 | s->clkm.dsp_rstct2 = 0x0000; |
1829 | } |
1830 | |
1831 | static void omap_clkm_init(MemoryRegion *memory, hwaddr mpu_base, |
1832 | hwaddr dsp_base, struct omap_mpu_state_s *s) |
1833 | { |
1834 | memory_region_init_io(&s->clkm_iomem, NULL((void*)0), &omap_clkm_ops, s, |
1835 | "omap-clkm", 0x100); |
1836 | memory_region_init_io(&s->clkdsp_iomem, NULL((void*)0), &omap_clkdsp_ops, s, |
1837 | "omap-clkdsp", 0x1000); |
1838 | |
1839 | s->clkm.arm_idlect1 = 0x03ff; |
1840 | s->clkm.arm_idlect2 = 0x0100; |
1841 | s->clkm.dsp_idlect1 = 0x0002; |
1842 | omap_clkm_reset(s); |
1843 | s->clkm.cold_start = 0x3a; |
1844 | |
1845 | memory_region_add_subregion(memory, mpu_base, &s->clkm_iomem); |
1846 | memory_region_add_subregion(memory, dsp_base, &s->clkdsp_iomem); |
1847 | } |
1848 | |
1849 | /* MPU I/O */ |
1850 | struct omap_mpuio_s { |
1851 | qemu_irq irq; |
1852 | qemu_irq kbd_irq; |
1853 | qemu_irq *in; |
1854 | qemu_irq handler[16]; |
1855 | qemu_irq wakeup; |
1856 | MemoryRegion iomem; |
1857 | |
1858 | uint16_t inputs; |
1859 | uint16_t outputs; |
1860 | uint16_t dir; |
1861 | uint16_t edge; |
1862 | uint16_t mask; |
1863 | uint16_t ints; |
1864 | |
1865 | uint16_t debounce; |
1866 | uint16_t latch; |
1867 | uint8_t event; |
1868 | |
1869 | uint8_t buttons[5]; |
1870 | uint8_t row_latch; |
1871 | uint8_t cols; |
1872 | int kbd_mask; |
1873 | int clk; |
1874 | }; |
1875 | |
1876 | static void omap_mpuio_set(void *opaque, int line, int level) |
1877 | { |
1878 | struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; |
1879 | uint16_t prev = s->inputs; |
1880 | |
1881 | if (level) |
1882 | s->inputs |= 1 << line; |
1883 | else |
1884 | s->inputs &= ~(1 << line); |
1885 | |
1886 | if (((1 << line) & s->dir & ~s->mask) && s->clk) { |
1887 | if ((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) { |
1888 | s->ints |= 1 << line; |
1889 | qemu_irq_raise(s->irq); |
1890 | /* TODO: wakeup */ |
1891 | } |
1892 | if ((s->event & (1 << 0)) && /* SET_GPIO_EVENT_MODE */ |
1893 | (s->event >> 1) == line) /* PIN_SELECT */ |
1894 | s->latch = s->inputs; |
1895 | } |
1896 | } |
1897 | |
1898 | static void omap_mpuio_kbd_update(struct omap_mpuio_s *s) |
1899 | { |
1900 | int i; |
1901 | uint8_t *row, rows = 0, cols = ~s->cols; |
1902 | |
1903 | for (row = s->buttons + 4, i = 1 << 4; i; row --, i >>= 1) |
1904 | if (*row & cols) |
1905 | rows |= i; |
1906 | |
1907 | qemu_set_irq(s->kbd_irq, rows && !s->kbd_mask && s->clk); |
1908 | s->row_latch = ~rows; |
1909 | } |
1910 | |
1911 | static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, |
1912 | unsigned size) |
1913 | { |
1914 | struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; |
1915 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
1916 | uint16_t ret; |
1917 | |
1918 | if (size != 2) { |
1919 | return omap_badwidth_read16(opaque, addr); |
1920 | } |
1921 | |
1922 | switch (offset) { |
1923 | case 0x00: /* INPUT_LATCH */ |
1924 | return s->inputs; |
1925 | |
1926 | case 0x04: /* OUTPUT_REG */ |
1927 | return s->outputs; |
1928 | |
1929 | case 0x08: /* IO_CNTL */ |
1930 | return s->dir; |
1931 | |
1932 | case 0x10: /* KBR_LATCH */ |
1933 | return s->row_latch; |
1934 | |
1935 | case 0x14: /* KBC_REG */ |
1936 | return s->cols; |
1937 | |
1938 | case 0x18: /* GPIO_EVENT_MODE_REG */ |
1939 | return s->event; |
1940 | |
1941 | case 0x1c: /* GPIO_INT_EDGE_REG */ |
1942 | return s->edge; |
1943 | |
1944 | case 0x20: /* KBD_INT */ |
1945 | return (~s->row_latch & 0x1f) && !s->kbd_mask; |
1946 | |
1947 | case 0x24: /* GPIO_INT */ |
1948 | ret = s->ints; |
1949 | s->ints &= s->mask; |
1950 | if (ret) |
1951 | qemu_irq_lower(s->irq); |
1952 | return ret; |
1953 | |
1954 | case 0x28: /* KBD_MASKIT */ |
1955 | return s->kbd_mask; |
1956 | |
1957 | case 0x2c: /* GPIO_MASKIT */ |
1958 | return s->mask; |
1959 | |
1960 | case 0x30: /* GPIO_DEBOUNCING_REG */ |
1961 | return s->debounce; |
1962 | |
1963 | case 0x34: /* GPIO_LATCH_REG */ |
1964 | return s->latch; |
1965 | } |
1966 | |
1967 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
1968 | return 0; |
1969 | } |
1970 | |
1971 | static void omap_mpuio_write(void *opaque, hwaddr addr, |
1972 | uint64_t value, unsigned size) |
1973 | { |
1974 | struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; |
1975 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
1976 | uint16_t diff; |
1977 | int ln; |
1978 | |
1979 | if (size != 2) { |
1980 | return omap_badwidth_write16(opaque, addr, value); |
1981 | } |
1982 | |
1983 | switch (offset) { |
1984 | case 0x04: /* OUTPUT_REG */ |
1985 | diff = (s->outputs ^ value) & ~s->dir; |
1986 | s->outputs = value; |
1987 | while ((ln = ffs(diff))) { |
1988 | ln --; |
1989 | if (s->handler[ln]) |
1990 | qemu_set_irq(s->handler[ln], (value >> ln) & 1); |
1991 | diff &= ~(1 << ln); |
1992 | } |
1993 | break; |
1994 | |
1995 | case 0x08: /* IO_CNTL */ |
1996 | diff = s->outputs & (s->dir ^ value); |
1997 | s->dir = value; |
1998 | |
1999 | value = s->outputs & ~s->dir; |
2000 | while ((ln = ffs(diff))) { |
2001 | ln --; |
2002 | if (s->handler[ln]) |
2003 | qemu_set_irq(s->handler[ln], (value >> ln) & 1); |
2004 | diff &= ~(1 << ln); |
2005 | } |
2006 | break; |
2007 | |
2008 | case 0x14: /* KBC_REG */ |
2009 | s->cols = value; |
2010 | omap_mpuio_kbd_update(s); |
2011 | break; |
2012 | |
2013 | case 0x18: /* GPIO_EVENT_MODE_REG */ |
2014 | s->event = value & 0x1f; |
2015 | break; |
2016 | |
2017 | case 0x1c: /* GPIO_INT_EDGE_REG */ |
2018 | s->edge = value; |
2019 | break; |
2020 | |
2021 | case 0x28: /* KBD_MASKIT */ |
2022 | s->kbd_mask = value & 1; |
2023 | omap_mpuio_kbd_update(s); |
2024 | break; |
2025 | |
2026 | case 0x2c: /* GPIO_MASKIT */ |
2027 | s->mask = value; |
2028 | break; |
2029 | |
2030 | case 0x30: /* GPIO_DEBOUNCING_REG */ |
2031 | s->debounce = value & 0x1ff; |
2032 | break; |
2033 | |
2034 | case 0x00: /* INPUT_LATCH */ |
2035 | case 0x10: /* KBR_LATCH */ |
2036 | case 0x20: /* KBD_INT */ |
2037 | case 0x24: /* GPIO_INT */ |
2038 | case 0x34: /* GPIO_LATCH_REG */ |
2039 | OMAP_RO_REG(addr)fprintf(stderr, "%s: Read-only register " "%#08" "l" "x" "\n" , __FUNCTION__, addr); |
2040 | return; |
2041 | |
2042 | default: |
2043 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
2044 | return; |
2045 | } |
2046 | } |
2047 | |
2048 | static const MemoryRegionOps omap_mpuio_ops = { |
2049 | .read = omap_mpuio_read, |
2050 | .write = omap_mpuio_write, |
2051 | .endianness = DEVICE_NATIVE_ENDIAN, |
2052 | }; |
2053 | |
2054 | static void omap_mpuio_reset(struct omap_mpuio_s *s) |
2055 | { |
2056 | s->inputs = 0; |
2057 | s->outputs = 0; |
2058 | s->dir = ~0; |
2059 | s->event = 0; |
2060 | s->edge = 0; |
2061 | s->kbd_mask = 0; |
2062 | s->mask = 0; |
2063 | s->debounce = 0; |
2064 | s->latch = 0; |
2065 | s->ints = 0; |
2066 | s->row_latch = 0x1f; |
2067 | s->clk = 1; |
2068 | } |
2069 | |
2070 | static void omap_mpuio_onoff(void *opaque, int line, int on) |
2071 | { |
2072 | struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; |
2073 | |
2074 | s->clk = on; |
2075 | if (on) |
2076 | omap_mpuio_kbd_update(s); |
2077 | } |
2078 | |
2079 | static struct omap_mpuio_s *omap_mpuio_init(MemoryRegion *memory, |
2080 | hwaddr base, |
2081 | qemu_irq kbd_int, qemu_irq gpio_int, qemu_irq wakeup, |
2082 | omap_clk clk) |
2083 | { |
2084 | struct omap_mpuio_s *s = (struct omap_mpuio_s *) |
2085 | g_malloc0(sizeof(struct omap_mpuio_s)); |
2086 | |
2087 | s->irq = gpio_int; |
2088 | s->kbd_irq = kbd_int; |
2089 | s->wakeup = wakeup; |
2090 | s->in = qemu_allocate_irqs(omap_mpuio_set, s, 16); |
2091 | omap_mpuio_reset(s); |
2092 | |
2093 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_mpuio_ops, s, |
2094 | "omap-mpuio", 0x800); |
2095 | memory_region_add_subregion(memory, base, &s->iomem); |
2096 | |
2097 | omap_clk_adduser(clk, qemu_allocate_irqs(omap_mpuio_onoff, s, 1)[0]); |
2098 | |
2099 | return s; |
2100 | } |
2101 | |
2102 | qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s) |
2103 | { |
2104 | return s->in; |
2105 | } |
2106 | |
2107 | void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler) |
2108 | { |
2109 | if (line >= 16 || line < 0) |
2110 | hw_error("%s: No GPIO line %i\n", __FUNCTION__, line); |
2111 | s->handler[line] = handler; |
2112 | } |
2113 | |
2114 | void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down) |
2115 | { |
2116 | if (row >= 5 || row < 0) |
2117 | hw_error("%s: No key %i-%i\n", __FUNCTION__, col, row); |
2118 | |
2119 | if (down) |
2120 | s->buttons[row] |= 1 << col; |
2121 | else |
2122 | s->buttons[row] &= ~(1 << col); |
2123 | |
2124 | omap_mpuio_kbd_update(s); |
2125 | } |
2126 | |
2127 | /* MicroWire Interface */ |
2128 | struct omap_uwire_s { |
2129 | MemoryRegion iomem; |
2130 | qemu_irq txirq; |
2131 | qemu_irq rxirq; |
2132 | qemu_irq txdrq; |
2133 | |
2134 | uint16_t txbuf; |
2135 | uint16_t rxbuf; |
2136 | uint16_t control; |
2137 | uint16_t setup[5]; |
2138 | |
2139 | uWireSlave *chip[4]; |
2140 | }; |
2141 | |
2142 | static void omap_uwire_transfer_start(struct omap_uwire_s *s) |
2143 | { |
2144 | int chipselect = (s->control >> 10) & 3; /* INDEX */ |
2145 | uWireSlave *slave = s->chip[chipselect]; |
2146 | |
2147 | if ((s->control >> 5) & 0x1f) { /* NB_BITS_WR */ |
2148 | if (s->control & (1 << 12)) /* CS_CMD */ |
2149 | if (slave && slave->send) |
2150 | slave->send(slave->opaque, |
2151 | s->txbuf >> (16 - ((s->control >> 5) & 0x1f))); |
2152 | s->control &= ~(1 << 14); /* CSRB */ |
2153 | /* TODO: depending on s->setup[4] bits [1:0] assert an IRQ or |
2154 | * a DRQ. When is the level IRQ supposed to be reset? */ |
2155 | } |
2156 | |
2157 | if ((s->control >> 0) & 0x1f) { /* NB_BITS_RD */ |
2158 | if (s->control & (1 << 12)) /* CS_CMD */ |
2159 | if (slave && slave->receive) |
2160 | s->rxbuf = slave->receive(slave->opaque); |
2161 | s->control |= 1 << 15; /* RDRB */ |
2162 | /* TODO: depending on s->setup[4] bits [1:0] assert an IRQ or |
2163 | * a DRQ. When is the level IRQ supposed to be reset? */ |
2164 | } |
2165 | } |
2166 | |
2167 | static uint64_t omap_uwire_read(void *opaque, hwaddr addr, |
2168 | unsigned size) |
2169 | { |
2170 | struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; |
2171 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
2172 | |
2173 | if (size != 2) { |
2174 | return omap_badwidth_read16(opaque, addr); |
2175 | } |
2176 | |
2177 | switch (offset) { |
2178 | case 0x00: /* RDR */ |
2179 | s->control &= ~(1 << 15); /* RDRB */ |
2180 | return s->rxbuf; |
2181 | |
2182 | case 0x04: /* CSR */ |
2183 | return s->control; |
2184 | |
2185 | case 0x08: /* SR1 */ |
2186 | return s->setup[0]; |
2187 | case 0x0c: /* SR2 */ |
2188 | return s->setup[1]; |
2189 | case 0x10: /* SR3 */ |
2190 | return s->setup[2]; |
2191 | case 0x14: /* SR4 */ |
2192 | return s->setup[3]; |
2193 | case 0x18: /* SR5 */ |
2194 | return s->setup[4]; |
2195 | } |
2196 | |
2197 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
2198 | return 0; |
2199 | } |
2200 | |
2201 | static void omap_uwire_write(void *opaque, hwaddr addr, |
2202 | uint64_t value, unsigned size) |
2203 | { |
2204 | struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; |
2205 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
2206 | |
2207 | if (size != 2) { |
2208 | return omap_badwidth_write16(opaque, addr, value); |
2209 | } |
2210 | |
2211 | switch (offset) { |
2212 | case 0x00: /* TDR */ |
2213 | s->txbuf = value; /* TD */ |
2214 | if ((s->setup[4] & (1 << 2)) && /* AUTO_TX_EN */ |
2215 | ((s->setup[4] & (1 << 3)) || /* CS_TOGGLE_TX_EN */ |
2216 | (s->control & (1 << 12)))) { /* CS_CMD */ |
2217 | s->control |= 1 << 14; /* CSRB */ |
2218 | omap_uwire_transfer_start(s); |
2219 | } |
2220 | break; |
2221 | |
2222 | case 0x04: /* CSR */ |
2223 | s->control = value & 0x1fff; |
2224 | if (value & (1 << 13)) /* START */ |
2225 | omap_uwire_transfer_start(s); |
2226 | break; |
2227 | |
2228 | case 0x08: /* SR1 */ |
2229 | s->setup[0] = value & 0x003f; |
2230 | break; |
2231 | |
2232 | case 0x0c: /* SR2 */ |
2233 | s->setup[1] = value & 0x0fc0; |
2234 | break; |
2235 | |
2236 | case 0x10: /* SR3 */ |
2237 | s->setup[2] = value & 0x0003; |
2238 | break; |
2239 | |
2240 | case 0x14: /* SR4 */ |
2241 | s->setup[3] = value & 0x0001; |
2242 | break; |
2243 | |
2244 | case 0x18: /* SR5 */ |
2245 | s->setup[4] = value & 0x000f; |
2246 | break; |
2247 | |
2248 | default: |
2249 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
2250 | return; |
2251 | } |
2252 | } |
2253 | |
2254 | static const MemoryRegionOps omap_uwire_ops = { |
2255 | .read = omap_uwire_read, |
2256 | .write = omap_uwire_write, |
2257 | .endianness = DEVICE_NATIVE_ENDIAN, |
2258 | }; |
2259 | |
2260 | static void omap_uwire_reset(struct omap_uwire_s *s) |
2261 | { |
2262 | s->control = 0; |
2263 | s->setup[0] = 0; |
2264 | s->setup[1] = 0; |
2265 | s->setup[2] = 0; |
2266 | s->setup[3] = 0; |
2267 | s->setup[4] = 0; |
2268 | } |
2269 | |
2270 | static struct omap_uwire_s *omap_uwire_init(MemoryRegion *system_memory, |
2271 | hwaddr base, |
2272 | qemu_irq txirq, qemu_irq rxirq, |
2273 | qemu_irq dma, |
2274 | omap_clk clk) |
2275 | { |
2276 | struct omap_uwire_s *s = (struct omap_uwire_s *) |
2277 | g_malloc0(sizeof(struct omap_uwire_s)); |
2278 | |
2279 | s->txirq = txirq; |
2280 | s->rxirq = rxirq; |
2281 | s->txdrq = dma; |
2282 | omap_uwire_reset(s); |
2283 | |
2284 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_uwire_ops, s, "omap-uwire", 0x800); |
2285 | memory_region_add_subregion(system_memory, base, &s->iomem); |
2286 | |
2287 | return s; |
2288 | } |
2289 | |
2290 | void omap_uwire_attach(struct omap_uwire_s *s, |
2291 | uWireSlave *slave, int chipselect) |
2292 | { |
2293 | if (chipselect < 0 || chipselect > 3) { |
2294 | fprintf(stderrstderr, "%s: Bad chipselect %i\n", __FUNCTION__, chipselect); |
2295 | exit(-1); |
2296 | } |
2297 | |
2298 | s->chip[chipselect] = slave; |
2299 | } |
2300 | |
2301 | /* Pseudonoise Pulse-Width Light Modulator */ |
2302 | struct omap_pwl_s { |
2303 | MemoryRegion iomem; |
2304 | uint8_t output; |
2305 | uint8_t level; |
2306 | uint8_t enable; |
2307 | int clk; |
2308 | }; |
2309 | |
2310 | static void omap_pwl_update(struct omap_pwl_s *s) |
2311 | { |
2312 | int output = (s->clk && s->enable) ? s->level : 0; |
2313 | |
2314 | if (output != s->output) { |
2315 | s->output = output; |
2316 | printf("%s: Backlight now at %i/256\n", __FUNCTION__, output); |
2317 | } |
2318 | } |
2319 | |
2320 | static uint64_t omap_pwl_read(void *opaque, hwaddr addr, |
2321 | unsigned size) |
2322 | { |
2323 | struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; |
2324 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
2325 | |
2326 | if (size != 1) { |
2327 | return omap_badwidth_read8(opaque, addr); |
2328 | } |
2329 | |
2330 | switch (offset) { |
2331 | case 0x00: /* PWL_LEVEL */ |
2332 | return s->level; |
2333 | case 0x04: /* PWL_CTRL */ |
2334 | return s->enable; |
2335 | } |
2336 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
2337 | return 0; |
2338 | } |
2339 | |
2340 | static void omap_pwl_write(void *opaque, hwaddr addr, |
2341 | uint64_t value, unsigned size) |
2342 | { |
2343 | struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; |
2344 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
2345 | |
2346 | if (size != 1) { |
2347 | return omap_badwidth_write8(opaque, addr, value); |
2348 | } |
2349 | |
2350 | switch (offset) { |
2351 | case 0x00: /* PWL_LEVEL */ |
2352 | s->level = value; |
2353 | omap_pwl_update(s); |
2354 | break; |
2355 | case 0x04: /* PWL_CTRL */ |
2356 | s->enable = value & 1; |
2357 | omap_pwl_update(s); |
2358 | break; |
2359 | default: |
2360 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
2361 | return; |
2362 | } |
2363 | } |
2364 | |
2365 | static const MemoryRegionOps omap_pwl_ops = { |
2366 | .read = omap_pwl_read, |
2367 | .write = omap_pwl_write, |
2368 | .endianness = DEVICE_NATIVE_ENDIAN, |
2369 | }; |
2370 | |
2371 | static void omap_pwl_reset(struct omap_pwl_s *s) |
2372 | { |
2373 | s->output = 0; |
2374 | s->level = 0; |
2375 | s->enable = 0; |
2376 | s->clk = 1; |
2377 | omap_pwl_update(s); |
2378 | } |
2379 | |
2380 | static void omap_pwl_clk_update(void *opaque, int line, int on) |
2381 | { |
2382 | struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; |
2383 | |
2384 | s->clk = on; |
2385 | omap_pwl_update(s); |
2386 | } |
2387 | |
2388 | static struct omap_pwl_s *omap_pwl_init(MemoryRegion *system_memory, |
2389 | hwaddr base, |
2390 | omap_clk clk) |
2391 | { |
2392 | struct omap_pwl_s *s = g_malloc0(sizeof(*s)); |
2393 | |
2394 | omap_pwl_reset(s); |
2395 | |
2396 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_pwl_ops, s, |
2397 | "omap-pwl", 0x800); |
2398 | memory_region_add_subregion(system_memory, base, &s->iomem); |
2399 | |
2400 | omap_clk_adduser(clk, qemu_allocate_irqs(omap_pwl_clk_update, s, 1)[0]); |
2401 | return s; |
2402 | } |
2403 | |
2404 | /* Pulse-Width Tone module */ |
2405 | struct omap_pwt_s { |
2406 | MemoryRegion iomem; |
2407 | uint8_t frc; |
2408 | uint8_t vrc; |
2409 | uint8_t gcr; |
2410 | omap_clk clk; |
2411 | }; |
2412 | |
2413 | static uint64_t omap_pwt_read(void *opaque, hwaddr addr, |
2414 | unsigned size) |
2415 | { |
2416 | struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; |
2417 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
2418 | |
2419 | if (size != 1) { |
2420 | return omap_badwidth_read8(opaque, addr); |
2421 | } |
2422 | |
2423 | switch (offset) { |
2424 | case 0x00: /* FRC */ |
2425 | return s->frc; |
2426 | case 0x04: /* VCR */ |
2427 | return s->vrc; |
2428 | case 0x08: /* GCR */ |
2429 | return s->gcr; |
2430 | } |
2431 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
2432 | return 0; |
2433 | } |
2434 | |
2435 | static void omap_pwt_write(void *opaque, hwaddr addr, |
2436 | uint64_t value, unsigned size) |
2437 | { |
2438 | struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; |
2439 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
2440 | |
2441 | if (size != 1) { |
2442 | return omap_badwidth_write8(opaque, addr, value); |
2443 | } |
2444 | |
2445 | switch (offset) { |
2446 | case 0x00: /* FRC */ |
2447 | s->frc = value & 0x3f; |
2448 | break; |
2449 | case 0x04: /* VRC */ |
2450 | if ((value ^ s->vrc) & 1) { |
2451 | if (value & 1) |
2452 | printf("%s: %iHz buzz on\n", __FUNCTION__, (int) |
2453 | /* 1.5 MHz from a 12-MHz or 13-MHz PWT_CLK */ |
2454 | ((omap_clk_getrate(s->clk) >> 3) / |
2455 | /* Pre-multiplexer divider */ |
2456 | ((s->gcr & 2) ? 1 : 154) / |
2457 | /* Octave multiplexer */ |
2458 | (2 << (value & 3)) * |
2459 | /* 101/107 divider */ |
2460 | ((value & (1 << 2)) ? 101 : 107) * |
2461 | /* 49/55 divider */ |
2462 | ((value & (1 << 3)) ? 49 : 55) * |
2463 | /* 50/63 divider */ |
2464 | ((value & (1 << 4)) ? 50 : 63) * |
2465 | /* 80/127 divider */ |
2466 | ((value & (1 << 5)) ? 80 : 127) / |
2467 | (107 * 55 * 63 * 127))); |
2468 | else |
2469 | printf("%s: silence!\n", __FUNCTION__); |
2470 | } |
2471 | s->vrc = value & 0x7f; |
2472 | break; |
2473 | case 0x08: /* GCR */ |
2474 | s->gcr = value & 3; |
2475 | break; |
2476 | default: |
2477 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
2478 | return; |
2479 | } |
2480 | } |
2481 | |
2482 | static const MemoryRegionOps omap_pwt_ops = { |
2483 | .read =omap_pwt_read, |
2484 | .write = omap_pwt_write, |
2485 | .endianness = DEVICE_NATIVE_ENDIAN, |
2486 | }; |
2487 | |
2488 | static void omap_pwt_reset(struct omap_pwt_s *s) |
2489 | { |
2490 | s->frc = 0; |
2491 | s->vrc = 0; |
2492 | s->gcr = 0; |
2493 | } |
2494 | |
2495 | static struct omap_pwt_s *omap_pwt_init(MemoryRegion *system_memory, |
2496 | hwaddr base, |
2497 | omap_clk clk) |
2498 | { |
2499 | struct omap_pwt_s *s = g_malloc0(sizeof(*s)); |
2500 | s->clk = clk; |
2501 | omap_pwt_reset(s); |
2502 | |
2503 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_pwt_ops, s, |
2504 | "omap-pwt", 0x800); |
2505 | memory_region_add_subregion(system_memory, base, &s->iomem); |
2506 | return s; |
2507 | } |
2508 | |
2509 | /* Real-time Clock module */ |
2510 | struct omap_rtc_s { |
2511 | MemoryRegion iomem; |
2512 | qemu_irq irq; |
2513 | qemu_irq alarm; |
2514 | QEMUTimer *clk; |
2515 | |
2516 | uint8_t interrupts; |
2517 | uint8_t status; |
2518 | int16_t comp_reg; |
2519 | int running; |
2520 | int pm_am; |
2521 | int auto_comp; |
2522 | int round; |
2523 | struct tm alarm_tm; |
2524 | time_t alarm_ti; |
2525 | |
2526 | struct tm current_tm; |
2527 | time_t ti; |
2528 | uint64_t tick; |
2529 | }; |
2530 | |
2531 | static void omap_rtc_interrupts_update(struct omap_rtc_s *s) |
2532 | { |
2533 | /* s->alarm is level-triggered */ |
2534 | qemu_set_irq(s->alarm, (s->status >> 6) & 1); |
2535 | } |
2536 | |
2537 | static void omap_rtc_alarm_update(struct omap_rtc_s *s) |
2538 | { |
2539 | s->alarm_ti = mktimegm(&s->alarm_tm); |
2540 | if (s->alarm_ti == -1) |
2541 | printf("%s: conversion failed\n", __FUNCTION__); |
2542 | } |
2543 | |
2544 | static uint64_t omap_rtc_read(void *opaque, hwaddr addr, |
2545 | unsigned size) |
2546 | { |
2547 | struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; |
2548 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
2549 | uint8_t i; |
2550 | |
2551 | if (size != 1) { |
2552 | return omap_badwidth_read8(opaque, addr); |
2553 | } |
2554 | |
2555 | switch (offset) { |
2556 | case 0x00: /* SECONDS_REG */ |
2557 | return to_bcd(s->current_tm.tm_sec); |
2558 | |
2559 | case 0x04: /* MINUTES_REG */ |
2560 | return to_bcd(s->current_tm.tm_min); |
2561 | |
2562 | case 0x08: /* HOURS_REG */ |
2563 | if (s->pm_am) |
2564 | return ((s->current_tm.tm_hour > 11) << 7) | |
2565 | to_bcd(((s->current_tm.tm_hour - 1) % 12) + 1); |
2566 | else |
2567 | return to_bcd(s->current_tm.tm_hour); |
2568 | |
2569 | case 0x0c: /* DAYS_REG */ |
2570 | return to_bcd(s->current_tm.tm_mday); |
2571 | |
2572 | case 0x10: /* MONTHS_REG */ |
2573 | return to_bcd(s->current_tm.tm_mon + 1); |
2574 | |
2575 | case 0x14: /* YEARS_REG */ |
2576 | return to_bcd(s->current_tm.tm_year % 100); |
2577 | |
2578 | case 0x18: /* WEEK_REG */ |
2579 | return s->current_tm.tm_wday; |
2580 | |
2581 | case 0x20: /* ALARM_SECONDS_REG */ |
2582 | return to_bcd(s->alarm_tm.tm_sec); |
2583 | |
2584 | case 0x24: /* ALARM_MINUTES_REG */ |
2585 | return to_bcd(s->alarm_tm.tm_min); |
2586 | |
2587 | case 0x28: /* ALARM_HOURS_REG */ |
2588 | if (s->pm_am) |
2589 | return ((s->alarm_tm.tm_hour > 11) << 7) | |
2590 | to_bcd(((s->alarm_tm.tm_hour - 1) % 12) + 1); |
2591 | else |
2592 | return to_bcd(s->alarm_tm.tm_hour); |
2593 | |
2594 | case 0x2c: /* ALARM_DAYS_REG */ |
2595 | return to_bcd(s->alarm_tm.tm_mday); |
2596 | |
2597 | case 0x30: /* ALARM_MONTHS_REG */ |
2598 | return to_bcd(s->alarm_tm.tm_mon + 1); |
2599 | |
2600 | case 0x34: /* ALARM_YEARS_REG */ |
2601 | return to_bcd(s->alarm_tm.tm_year % 100); |
2602 | |
2603 | case 0x40: /* RTC_CTRL_REG */ |
2604 | return (s->pm_am << 3) | (s->auto_comp << 2) | |
2605 | (s->round << 1) | s->running; |
2606 | |
2607 | case 0x44: /* RTC_STATUS_REG */ |
2608 | i = s->status; |
2609 | s->status &= ~0x3d; |
2610 | return i; |
2611 | |
2612 | case 0x48: /* RTC_INTERRUPTS_REG */ |
2613 | return s->interrupts; |
2614 | |
2615 | case 0x4c: /* RTC_COMP_LSB_REG */ |
2616 | return ((uint16_t) s->comp_reg) & 0xff; |
2617 | |
2618 | case 0x50: /* RTC_COMP_MSB_REG */ |
2619 | return ((uint16_t) s->comp_reg) >> 8; |
2620 | } |
2621 | |
2622 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
2623 | return 0; |
2624 | } |
2625 | |
2626 | static void omap_rtc_write(void *opaque, hwaddr addr, |
2627 | uint64_t value, unsigned size) |
2628 | { |
2629 | struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; |
2630 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
2631 | struct tm new_tm; |
2632 | time_t ti[2]; |
2633 | |
2634 | if (size != 1) { |
2635 | return omap_badwidth_write8(opaque, addr, value); |
2636 | } |
2637 | |
2638 | switch (offset) { |
2639 | case 0x00: /* SECONDS_REG */ |
2640 | #ifdef ALMDEBUG |
2641 | printf("RTC SEC_REG <-- %02x\n", value); |
2642 | #endif |
2643 | s->ti -= s->current_tm.tm_sec; |
2644 | s->ti += from_bcd(value); |
2645 | return; |
2646 | |
2647 | case 0x04: /* MINUTES_REG */ |
2648 | #ifdef ALMDEBUG |
2649 | printf("RTC MIN_REG <-- %02x\n", value); |
2650 | #endif |
2651 | s->ti -= s->current_tm.tm_min * 60; |
2652 | s->ti += from_bcd(value) * 60; |
2653 | return; |
2654 | |
2655 | case 0x08: /* HOURS_REG */ |
2656 | #ifdef ALMDEBUG |
2657 | printf("RTC HRS_REG <-- %02x\n", value); |
2658 | #endif |
2659 | s->ti -= s->current_tm.tm_hour * 3600; |
2660 | if (s->pm_am) { |
2661 | s->ti += (from_bcd(value & 0x3f) & 12) * 3600; |
2662 | s->ti += ((value >> 7) & 1) * 43200; |
2663 | } else |
2664 | s->ti += from_bcd(value & 0x3f) * 3600; |
2665 | return; |
2666 | |
2667 | case 0x0c: /* DAYS_REG */ |
2668 | #ifdef ALMDEBUG |
2669 | printf("RTC DAY_REG <-- %02x\n", value); |
2670 | #endif |
2671 | s->ti -= s->current_tm.tm_mday * 86400; |
2672 | s->ti += from_bcd(value) * 86400; |
2673 | return; |
2674 | |
2675 | case 0x10: /* MONTHS_REG */ |
2676 | #ifdef ALMDEBUG |
2677 | printf("RTC MTH_REG <-- %02x\n", value); |
2678 | #endif |
2679 | memcpy(&new_tm, &s->current_tm, sizeof(new_tm)); |
2680 | new_tm.tm_mon = from_bcd(value); |
2681 | ti[0] = mktimegm(&s->current_tm); |
2682 | ti[1] = mktimegm(&new_tm); |
2683 | |
2684 | if (ti[0] != -1 && ti[1] != -1) { |
2685 | s->ti -= ti[0]; |
2686 | s->ti += ti[1]; |
2687 | } else { |
2688 | /* A less accurate version */ |
2689 | s->ti -= s->current_tm.tm_mon * 2592000; |
2690 | s->ti += from_bcd(value) * 2592000; |
2691 | } |
2692 | return; |
2693 | |
2694 | case 0x14: /* YEARS_REG */ |
2695 | #ifdef ALMDEBUG |
2696 | printf("RTC YRS_REG <-- %02x\n", value); |
2697 | #endif |
2698 | memcpy(&new_tm, &s->current_tm, sizeof(new_tm)); |
2699 | new_tm.tm_year += from_bcd(value) - (new_tm.tm_year % 100); |
2700 | ti[0] = mktimegm(&s->current_tm); |
2701 | ti[1] = mktimegm(&new_tm); |
2702 | |
2703 | if (ti[0] != -1 && ti[1] != -1) { |
2704 | s->ti -= ti[0]; |
2705 | s->ti += ti[1]; |
2706 | } else { |
2707 | /* A less accurate version */ |
2708 | s->ti -= (s->current_tm.tm_year % 100) * 31536000; |
2709 | s->ti += from_bcd(value) * 31536000; |
2710 | } |
2711 | return; |
2712 | |
2713 | case 0x18: /* WEEK_REG */ |
2714 | return; /* Ignored */ |
2715 | |
2716 | case 0x20: /* ALARM_SECONDS_REG */ |
2717 | #ifdef ALMDEBUG |
2718 | printf("ALM SEC_REG <-- %02x\n", value); |
2719 | #endif |
2720 | s->alarm_tm.tm_sec = from_bcd(value); |
2721 | omap_rtc_alarm_update(s); |
2722 | return; |
2723 | |
2724 | case 0x24: /* ALARM_MINUTES_REG */ |
2725 | #ifdef ALMDEBUG |
2726 | printf("ALM MIN_REG <-- %02x\n", value); |
2727 | #endif |
2728 | s->alarm_tm.tm_min = from_bcd(value); |
2729 | omap_rtc_alarm_update(s); |
2730 | return; |
2731 | |
2732 | case 0x28: /* ALARM_HOURS_REG */ |
2733 | #ifdef ALMDEBUG |
2734 | printf("ALM HRS_REG <-- %02x\n", value); |
2735 | #endif |
2736 | if (s->pm_am) |
2737 | s->alarm_tm.tm_hour = |
2738 | ((from_bcd(value & 0x3f)) % 12) + |
2739 | ((value >> 7) & 1) * 12; |
2740 | else |
2741 | s->alarm_tm.tm_hour = from_bcd(value); |
2742 | omap_rtc_alarm_update(s); |
2743 | return; |
2744 | |
2745 | case 0x2c: /* ALARM_DAYS_REG */ |
2746 | #ifdef ALMDEBUG |
2747 | printf("ALM DAY_REG <-- %02x\n", value); |
2748 | #endif |
2749 | s->alarm_tm.tm_mday = from_bcd(value); |
2750 | omap_rtc_alarm_update(s); |
2751 | return; |
2752 | |
2753 | case 0x30: /* ALARM_MONTHS_REG */ |
2754 | #ifdef ALMDEBUG |
2755 | printf("ALM MON_REG <-- %02x\n", value); |
2756 | #endif |
2757 | s->alarm_tm.tm_mon = from_bcd(value); |
2758 | omap_rtc_alarm_update(s); |
2759 | return; |
2760 | |
2761 | case 0x34: /* ALARM_YEARS_REG */ |
2762 | #ifdef ALMDEBUG |
2763 | printf("ALM YRS_REG <-- %02x\n", value); |
2764 | #endif |
2765 | s->alarm_tm.tm_year = from_bcd(value); |
2766 | omap_rtc_alarm_update(s); |
2767 | return; |
2768 | |
2769 | case 0x40: /* RTC_CTRL_REG */ |
2770 | #ifdef ALMDEBUG |
2771 | printf("RTC CONTROL <-- %02x\n", value); |
2772 | #endif |
2773 | s->pm_am = (value >> 3) & 1; |
2774 | s->auto_comp = (value >> 2) & 1; |
2775 | s->round = (value >> 1) & 1; |
2776 | s->running = value & 1; |
2777 | s->status &= 0xfd; |
2778 | s->status |= s->running << 1; |
2779 | return; |
2780 | |
2781 | case 0x44: /* RTC_STATUS_REG */ |
2782 | #ifdef ALMDEBUG |
2783 | printf("RTC STATUSL <-- %02x\n", value); |
2784 | #endif |
2785 | s->status &= ~((value & 0xc0) ^ 0x80); |
2786 | omap_rtc_interrupts_update(s); |
2787 | return; |
2788 | |
2789 | case 0x48: /* RTC_INTERRUPTS_REG */ |
2790 | #ifdef ALMDEBUG |
2791 | printf("RTC INTRS <-- %02x\n", value); |
2792 | #endif |
2793 | s->interrupts = value; |
2794 | return; |
2795 | |
2796 | case 0x4c: /* RTC_COMP_LSB_REG */ |
2797 | #ifdef ALMDEBUG |
2798 | printf("RTC COMPLSB <-- %02x\n", value); |
2799 | #endif |
2800 | s->comp_reg &= 0xff00; |
2801 | s->comp_reg |= 0x00ff & value; |
2802 | return; |
2803 | |
2804 | case 0x50: /* RTC_COMP_MSB_REG */ |
2805 | #ifdef ALMDEBUG |
2806 | printf("RTC COMPMSB <-- %02x\n", value); |
2807 | #endif |
2808 | s->comp_reg &= 0x00ff; |
2809 | s->comp_reg |= 0xff00 & (value << 8); |
2810 | return; |
2811 | |
2812 | default: |
2813 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
2814 | return; |
2815 | } |
2816 | } |
2817 | |
2818 | static const MemoryRegionOps omap_rtc_ops = { |
2819 | .read = omap_rtc_read, |
2820 | .write = omap_rtc_write, |
2821 | .endianness = DEVICE_NATIVE_ENDIAN, |
2822 | }; |
2823 | |
2824 | static void omap_rtc_tick(void *opaque) |
2825 | { |
2826 | struct omap_rtc_s *s = opaque; |
2827 | |
2828 | if (s->round) { |
2829 | /* Round to nearest full minute. */ |
2830 | if (s->current_tm.tm_sec < 30) |
2831 | s->ti -= s->current_tm.tm_sec; |
2832 | else |
2833 | s->ti += 60 - s->current_tm.tm_sec; |
2834 | |
2835 | s->round = 0; |
2836 | } |
2837 | |
2838 | localtime_r(&s->ti, &s->current_tm); |
2839 | |
2840 | if ((s->interrupts & 0x08) && s->ti == s->alarm_ti) { |
2841 | s->status |= 0x40; |
2842 | omap_rtc_interrupts_update(s); |
2843 | } |
2844 | |
2845 | if (s->interrupts & 0x04) |
2846 | switch (s->interrupts & 3) { |
2847 | case 0: |
2848 | s->status |= 0x04; |
2849 | qemu_irq_pulse(s->irq); |
2850 | break; |
2851 | case 1: |
2852 | if (s->current_tm.tm_sec) |
2853 | break; |
2854 | s->status |= 0x08; |
2855 | qemu_irq_pulse(s->irq); |
2856 | break; |
2857 | case 2: |
2858 | if (s->current_tm.tm_sec || s->current_tm.tm_min) |
2859 | break; |
2860 | s->status |= 0x10; |
2861 | qemu_irq_pulse(s->irq); |
2862 | break; |
2863 | case 3: |
2864 | if (s->current_tm.tm_sec || |
2865 | s->current_tm.tm_min || s->current_tm.tm_hour) |
2866 | break; |
2867 | s->status |= 0x20; |
2868 | qemu_irq_pulse(s->irq); |
2869 | break; |
2870 | } |
2871 | |
2872 | /* Move on */ |
2873 | if (s->running) |
2874 | s->ti ++; |
2875 | s->tick += 1000; |
2876 | |
2877 | /* |
2878 | * Every full hour add a rough approximation of the compensation |
2879 | * register to the 32kHz Timer (which drives the RTC) value. |
2880 | */ |
2881 | if (s->auto_comp && !s->current_tm.tm_sec && !s->current_tm.tm_min) |
2882 | s->tick += s->comp_reg * 1000 / 32768; |
2883 | |
2884 | timer_mod(s->clk, s->tick); |
2885 | } |
2886 | |
2887 | static void omap_rtc_reset(struct omap_rtc_s *s) |
2888 | { |
2889 | struct tm tm; |
2890 | |
2891 | s->interrupts = 0; |
2892 | s->comp_reg = 0; |
2893 | s->running = 0; |
2894 | s->pm_am = 0; |
2895 | s->auto_comp = 0; |
2896 | s->round = 0; |
2897 | s->tick = qemu_clock_get_ms(rtc_clock); |
2898 | memset(&s->alarm_tm, 0, sizeof(s->alarm_tm)); |
2899 | s->alarm_tm.tm_mday = 0x01; |
2900 | s->status = 1 << 7; |
2901 | qemu_get_timedate(&tm, 0); |
2902 | s->ti = mktimegm(&tm); |
2903 | |
2904 | omap_rtc_alarm_update(s); |
2905 | omap_rtc_tick(s); |
2906 | } |
2907 | |
2908 | static struct omap_rtc_s *omap_rtc_init(MemoryRegion *system_memory, |
2909 | hwaddr base, |
2910 | qemu_irq timerirq, qemu_irq alarmirq, |
2911 | omap_clk clk) |
2912 | { |
2913 | struct omap_rtc_s *s = (struct omap_rtc_s *) |
2914 | g_malloc0(sizeof(struct omap_rtc_s)); |
2915 | |
2916 | s->irq = timerirq; |
2917 | s->alarm = alarmirq; |
2918 | s->clk = timer_new_ms(rtc_clock, omap_rtc_tick, s); |
2919 | |
2920 | omap_rtc_reset(s); |
2921 | |
2922 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_rtc_ops, s, |
2923 | "omap-rtc", 0x800); |
2924 | memory_region_add_subregion(system_memory, base, &s->iomem); |
2925 | |
2926 | return s; |
2927 | } |
2928 | |
2929 | /* Multi-channel Buffered Serial Port interfaces */ |
2930 | struct omap_mcbsp_s { |
2931 | MemoryRegion iomem; |
2932 | qemu_irq txirq; |
2933 | qemu_irq rxirq; |
2934 | qemu_irq txdrq; |
2935 | qemu_irq rxdrq; |
2936 | |
2937 | uint16_t spcr[2]; |
2938 | uint16_t rcr[2]; |
2939 | uint16_t xcr[2]; |
2940 | uint16_t srgr[2]; |
2941 | uint16_t mcr[2]; |
2942 | uint16_t pcr; |
2943 | uint16_t rcer[8]; |
2944 | uint16_t xcer[8]; |
2945 | int tx_rate; |
2946 | int rx_rate; |
2947 | int tx_req; |
2948 | int rx_req; |
2949 | |
2950 | I2SCodec *codec; |
2951 | QEMUTimer *source_timer; |
2952 | QEMUTimer *sink_timer; |
2953 | }; |
2954 | |
2955 | static void omap_mcbsp_intr_update(struct omap_mcbsp_s *s) |
2956 | { |
2957 | int irq; |
2958 | |
2959 | switch ((s->spcr[0] >> 4) & 3) { /* RINTM */ |
2960 | case 0: |
2961 | irq = (s->spcr[0] >> 1) & 1; /* RRDY */ |
2962 | break; |
2963 | case 3: |
2964 | irq = (s->spcr[0] >> 3) & 1; /* RSYNCERR */ |
2965 | break; |
2966 | default: |
2967 | irq = 0; |
2968 | break; |
2969 | } |
2970 | |
2971 | if (irq) |
2972 | qemu_irq_pulse(s->rxirq); |
2973 | |
2974 | switch ((s->spcr[1] >> 4) & 3) { /* XINTM */ |
2975 | case 0: |
2976 | irq = (s->spcr[1] >> 1) & 1; /* XRDY */ |
2977 | break; |
2978 | case 3: |
2979 | irq = (s->spcr[1] >> 3) & 1; /* XSYNCERR */ |
2980 | break; |
2981 | default: |
2982 | irq = 0; |
2983 | break; |
2984 | } |
2985 | |
2986 | if (irq) |
2987 | qemu_irq_pulse(s->txirq); |
2988 | } |
2989 | |
2990 | static void omap_mcbsp_rx_newdata(struct omap_mcbsp_s *s) |
2991 | { |
2992 | if ((s->spcr[0] >> 1) & 1) /* RRDY */ |
2993 | s->spcr[0] |= 1 << 2; /* RFULL */ |
2994 | s->spcr[0] |= 1 << 1; /* RRDY */ |
2995 | qemu_irq_raise(s->rxdrq); |
2996 | omap_mcbsp_intr_update(s); |
2997 | } |
2998 | |
2999 | static void omap_mcbsp_source_tick(void *opaque) |
3000 | { |
3001 | struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; |
3002 | static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; |
3003 | |
3004 | if (!s->rx_rate) |
3005 | return; |
3006 | if (s->rx_req) |
3007 | printf("%s: Rx FIFO overrun\n", __FUNCTION__); |
3008 | |
3009 | s->rx_req = s->rx_rate << bps[(s->rcr[0] >> 5) & 7]; |
3010 | |
3011 | omap_mcbsp_rx_newdata(s); |
3012 | timer_mod(s->source_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
3013 | get_ticks_per_sec()); |
3014 | } |
3015 | |
3016 | static void omap_mcbsp_rx_start(struct omap_mcbsp_s *s) |
3017 | { |
3018 | if (!s->codec || !s->codec->rts) |
3019 | omap_mcbsp_source_tick(s); |
3020 | else if (s->codec->in.len) { |
3021 | s->rx_req = s->codec->in.len; |
3022 | omap_mcbsp_rx_newdata(s); |
3023 | } |
3024 | } |
3025 | |
3026 | static void omap_mcbsp_rx_stop(struct omap_mcbsp_s *s) |
3027 | { |
3028 | timer_del(s->source_timer); |
3029 | } |
3030 | |
3031 | static void omap_mcbsp_rx_done(struct omap_mcbsp_s *s) |
3032 | { |
3033 | s->spcr[0] &= ~(1 << 1); /* RRDY */ |
3034 | qemu_irq_lower(s->rxdrq); |
3035 | omap_mcbsp_intr_update(s); |
3036 | } |
3037 | |
3038 | static void omap_mcbsp_tx_newdata(struct omap_mcbsp_s *s) |
3039 | { |
3040 | s->spcr[1] |= 1 << 1; /* XRDY */ |
3041 | qemu_irq_raise(s->txdrq); |
3042 | omap_mcbsp_intr_update(s); |
3043 | } |
3044 | |
3045 | static void omap_mcbsp_sink_tick(void *opaque) |
3046 | { |
3047 | struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; |
3048 | static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; |
3049 | |
3050 | if (!s->tx_rate) |
3051 | return; |
3052 | if (s->tx_req) |
3053 | printf("%s: Tx FIFO underrun\n", __FUNCTION__); |
3054 | |
3055 | s->tx_req = s->tx_rate << bps[(s->xcr[0] >> 5) & 7]; |
3056 | |
3057 | omap_mcbsp_tx_newdata(s); |
3058 | timer_mod(s->sink_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
3059 | get_ticks_per_sec()); |
3060 | } |
3061 | |
3062 | static void omap_mcbsp_tx_start(struct omap_mcbsp_s *s) |
3063 | { |
3064 | if (!s->codec || !s->codec->cts) |
3065 | omap_mcbsp_sink_tick(s); |
3066 | else if (s->codec->out.size) { |
3067 | s->tx_req = s->codec->out.size; |
3068 | omap_mcbsp_tx_newdata(s); |
3069 | } |
3070 | } |
3071 | |
3072 | static void omap_mcbsp_tx_done(struct omap_mcbsp_s *s) |
3073 | { |
3074 | s->spcr[1] &= ~(1 << 1); /* XRDY */ |
3075 | qemu_irq_lower(s->txdrq); |
3076 | omap_mcbsp_intr_update(s); |
3077 | if (s->codec && s->codec->cts) |
3078 | s->codec->tx_swallow(s->codec->opaque); |
3079 | } |
3080 | |
3081 | static void omap_mcbsp_tx_stop(struct omap_mcbsp_s *s) |
3082 | { |
3083 | s->tx_req = 0; |
3084 | omap_mcbsp_tx_done(s); |
3085 | timer_del(s->sink_timer); |
3086 | } |
3087 | |
3088 | static void omap_mcbsp_req_update(struct omap_mcbsp_s *s) |
3089 | { |
3090 | int prev_rx_rate, prev_tx_rate; |
3091 | int rx_rate = 0, tx_rate = 0; |
3092 | int cpu_rate = 1500000; /* XXX */ |
3093 | |
3094 | /* TODO: check CLKSTP bit */ |
3095 | if (s->spcr[1] & (1 << 6)) { /* GRST */ |
3096 | if (s->spcr[0] & (1 << 0)) { /* RRST */ |
3097 | if ((s->srgr[1] & (1 << 13)) && /* CLKSM */ |
3098 | (s->pcr & (1 << 8))) { /* CLKRM */ |
3099 | if (~s->pcr & (1 << 7)) /* SCLKME */ |
3100 | rx_rate = cpu_rate / |
3101 | ((s->srgr[0] & 0xff) + 1); /* CLKGDV */ |
3102 | } else |
3103 | if (s->codec) |
3104 | rx_rate = s->codec->rx_rate; |
3105 | } |
3106 | |
3107 | if (s->spcr[1] & (1 << 0)) { /* XRST */ |
3108 | if ((s->srgr[1] & (1 << 13)) && /* CLKSM */ |
3109 | (s->pcr & (1 << 9))) { /* CLKXM */ |
3110 | if (~s->pcr & (1 << 7)) /* SCLKME */ |
3111 | tx_rate = cpu_rate / |
3112 | ((s->srgr[0] & 0xff) + 1); /* CLKGDV */ |
3113 | } else |
3114 | if (s->codec) |
3115 | tx_rate = s->codec->tx_rate; |
3116 | } |
3117 | } |
3118 | prev_tx_rate = s->tx_rate; |
3119 | prev_rx_rate = s->rx_rate; |
3120 | s->tx_rate = tx_rate; |
3121 | s->rx_rate = rx_rate; |
3122 | |
3123 | if (s->codec) |
3124 | s->codec->set_rate(s->codec->opaque, rx_rate, tx_rate); |
3125 | |
3126 | if (!prev_tx_rate && tx_rate) |
3127 | omap_mcbsp_tx_start(s); |
3128 | else if (s->tx_rate && !tx_rate) |
3129 | omap_mcbsp_tx_stop(s); |
3130 | |
3131 | if (!prev_rx_rate && rx_rate) |
3132 | omap_mcbsp_rx_start(s); |
3133 | else if (prev_tx_rate && !tx_rate) |
3134 | omap_mcbsp_rx_stop(s); |
3135 | } |
3136 | |
3137 | static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, |
3138 | unsigned size) |
3139 | { |
3140 | struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; |
3141 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
3142 | uint16_t ret; |
3143 | |
3144 | if (size != 2) { |
3145 | return omap_badwidth_read16(opaque, addr); |
3146 | } |
3147 | |
3148 | switch (offset) { |
3149 | case 0x00: /* DRR2 */ |
3150 | if (((s->rcr[0] >> 5) & 7) < 3) /* RWDLEN1 */ |
3151 | return 0x0000; |
3152 | /* Fall through. */ |
3153 | case 0x02: /* DRR1 */ |
3154 | if (s->rx_req < 2) { |
3155 | printf("%s: Rx FIFO underrun\n", __FUNCTION__); |
3156 | omap_mcbsp_rx_done(s); |
3157 | } else { |
3158 | s->tx_req -= 2; |
3159 | if (s->codec && s->codec->in.len >= 2) { |
3160 | ret = s->codec->in.fifo[s->codec->in.start ++] << 8; |
3161 | ret |= s->codec->in.fifo[s->codec->in.start ++]; |
3162 | s->codec->in.len -= 2; |
3163 | } else |
3164 | ret = 0x0000; |
3165 | if (!s->tx_req) |
3166 | omap_mcbsp_rx_done(s); |
3167 | return ret; |
3168 | } |
3169 | return 0x0000; |
3170 | |
3171 | case 0x04: /* DXR2 */ |
3172 | case 0x06: /* DXR1 */ |
3173 | return 0x0000; |
3174 | |
3175 | case 0x08: /* SPCR2 */ |
3176 | return s->spcr[1]; |
3177 | case 0x0a: /* SPCR1 */ |
3178 | return s->spcr[0]; |
3179 | case 0x0c: /* RCR2 */ |
3180 | return s->rcr[1]; |
3181 | case 0x0e: /* RCR1 */ |
3182 | return s->rcr[0]; |
3183 | case 0x10: /* XCR2 */ |
3184 | return s->xcr[1]; |
3185 | case 0x12: /* XCR1 */ |
3186 | return s->xcr[0]; |
3187 | case 0x14: /* SRGR2 */ |
3188 | return s->srgr[1]; |
3189 | case 0x16: /* SRGR1 */ |
3190 | return s->srgr[0]; |
3191 | case 0x18: /* MCR2 */ |
3192 | return s->mcr[1]; |
3193 | case 0x1a: /* MCR1 */ |
3194 | return s->mcr[0]; |
3195 | case 0x1c: /* RCERA */ |
3196 | return s->rcer[0]; |
3197 | case 0x1e: /* RCERB */ |
3198 | return s->rcer[1]; |
3199 | case 0x20: /* XCERA */ |
3200 | return s->xcer[0]; |
3201 | case 0x22: /* XCERB */ |
3202 | return s->xcer[1]; |
3203 | case 0x24: /* PCR0 */ |
3204 | return s->pcr; |
3205 | case 0x26: /* RCERC */ |
3206 | return s->rcer[2]; |
3207 | case 0x28: /* RCERD */ |
3208 | return s->rcer[3]; |
3209 | case 0x2a: /* XCERC */ |
3210 | return s->xcer[2]; |
3211 | case 0x2c: /* XCERD */ |
3212 | return s->xcer[3]; |
3213 | case 0x2e: /* RCERE */ |
3214 | return s->rcer[4]; |
3215 | case 0x30: /* RCERF */ |
3216 | return s->rcer[5]; |
3217 | case 0x32: /* XCERE */ |
3218 | return s->xcer[4]; |
3219 | case 0x34: /* XCERF */ |
3220 | return s->xcer[5]; |
3221 | case 0x36: /* RCERG */ |
3222 | return s->rcer[6]; |
3223 | case 0x38: /* RCERH */ |
3224 | return s->rcer[7]; |
3225 | case 0x3a: /* XCERG */ |
3226 | return s->xcer[6]; |
3227 | case 0x3c: /* XCERH */ |
3228 | return s->xcer[7]; |
3229 | } |
3230 | |
3231 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
3232 | return 0; |
3233 | } |
3234 | |
3235 | static void omap_mcbsp_writeh(void *opaque, hwaddr addr, |
3236 | uint32_t value) |
3237 | { |
3238 | struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; |
3239 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
3240 | |
3241 | switch (offset) { |
3242 | case 0x00: /* DRR2 */ |
3243 | case 0x02: /* DRR1 */ |
3244 | OMAP_RO_REG(addr)fprintf(stderr, "%s: Read-only register " "%#08" "l" "x" "\n" , __FUNCTION__, addr); |
3245 | return; |
3246 | |
3247 | case 0x04: /* DXR2 */ |
3248 | if (((s->xcr[0] >> 5) & 7) < 3) /* XWDLEN1 */ |
3249 | return; |
3250 | /* Fall through. */ |
3251 | case 0x06: /* DXR1 */ |
3252 | if (s->tx_req > 1) { |
3253 | s->tx_req -= 2; |
3254 | if (s->codec && s->codec->cts) { |
3255 | s->codec->out.fifo[s->codec->out.len ++] = (value >> 8) & 0xff; |
3256 | s->codec->out.fifo[s->codec->out.len ++] = (value >> 0) & 0xff; |
3257 | } |
3258 | if (s->tx_req < 2) |
3259 | omap_mcbsp_tx_done(s); |
3260 | } else |
3261 | printf("%s: Tx FIFO overrun\n", __FUNCTION__); |
3262 | return; |
3263 | |
3264 | case 0x08: /* SPCR2 */ |
3265 | s->spcr[1] &= 0x0002; |
3266 | s->spcr[1] |= 0x03f9 & value; |
3267 | s->spcr[1] |= 0x0004 & (value << 2); /* XEMPTY := XRST */ |
3268 | if (~value & 1) /* XRST */ |
3269 | s->spcr[1] &= ~6; |
3270 | omap_mcbsp_req_update(s); |
3271 | return; |
3272 | case 0x0a: /* SPCR1 */ |
3273 | s->spcr[0] &= 0x0006; |
3274 | s->spcr[0] |= 0xf8f9 & value; |
3275 | if (value & (1 << 15)) /* DLB */ |
3276 | printf("%s: Digital Loopback mode enable attempt\n", __FUNCTION__); |
3277 | if (~value & 1) { /* RRST */ |
3278 | s->spcr[0] &= ~6; |
3279 | s->rx_req = 0; |
3280 | omap_mcbsp_rx_done(s); |
3281 | } |
3282 | omap_mcbsp_req_update(s); |
3283 | return; |
3284 | |
3285 | case 0x0c: /* RCR2 */ |
3286 | s->rcr[1] = value & 0xffff; |
3287 | return; |
3288 | case 0x0e: /* RCR1 */ |
3289 | s->rcr[0] = value & 0x7fe0; |
3290 | return; |
3291 | case 0x10: /* XCR2 */ |
3292 | s->xcr[1] = value & 0xffff; |
3293 | return; |
3294 | case 0x12: /* XCR1 */ |
3295 | s->xcr[0] = value & 0x7fe0; |
3296 | return; |
3297 | case 0x14: /* SRGR2 */ |
3298 | s->srgr[1] = value & 0xffff; |
3299 | omap_mcbsp_req_update(s); |
3300 | return; |
3301 | case 0x16: /* SRGR1 */ |
3302 | s->srgr[0] = value & 0xffff; |
3303 | omap_mcbsp_req_update(s); |
3304 | return; |
3305 | case 0x18: /* MCR2 */ |
3306 | s->mcr[1] = value & 0x03e3; |
3307 | if (value & 3) /* XMCM */ |
3308 | printf("%s: Tx channel selection mode enable attempt\n", |
3309 | __FUNCTION__); |
3310 | return; |
3311 | case 0x1a: /* MCR1 */ |
3312 | s->mcr[0] = value & 0x03e1; |
3313 | if (value & 1) /* RMCM */ |
3314 | printf("%s: Rx channel selection mode enable attempt\n", |
3315 | __FUNCTION__); |
3316 | return; |
3317 | case 0x1c: /* RCERA */ |
3318 | s->rcer[0] = value & 0xffff; |
3319 | return; |
3320 | case 0x1e: /* RCERB */ |
3321 | s->rcer[1] = value & 0xffff; |
3322 | return; |
3323 | case 0x20: /* XCERA */ |
3324 | s->xcer[0] = value & 0xffff; |
3325 | return; |
3326 | case 0x22: /* XCERB */ |
3327 | s->xcer[1] = value & 0xffff; |
3328 | return; |
3329 | case 0x24: /* PCR0 */ |
3330 | s->pcr = value & 0x7faf; |
3331 | return; |
3332 | case 0x26: /* RCERC */ |
3333 | s->rcer[2] = value & 0xffff; |
3334 | return; |
3335 | case 0x28: /* RCERD */ |
3336 | s->rcer[3] = value & 0xffff; |
3337 | return; |
3338 | case 0x2a: /* XCERC */ |
3339 | s->xcer[2] = value & 0xffff; |
3340 | return; |
3341 | case 0x2c: /* XCERD */ |
3342 | s->xcer[3] = value & 0xffff; |
3343 | return; |
3344 | case 0x2e: /* RCERE */ |
3345 | s->rcer[4] = value & 0xffff; |
3346 | return; |
3347 | case 0x30: /* RCERF */ |
3348 | s->rcer[5] = value & 0xffff; |
3349 | return; |
3350 | case 0x32: /* XCERE */ |
3351 | s->xcer[4] = value & 0xffff; |
3352 | return; |
3353 | case 0x34: /* XCERF */ |
3354 | s->xcer[5] = value & 0xffff; |
3355 | return; |
3356 | case 0x36: /* RCERG */ |
3357 | s->rcer[6] = value & 0xffff; |
3358 | return; |
3359 | case 0x38: /* RCERH */ |
3360 | s->rcer[7] = value & 0xffff; |
3361 | return; |
3362 | case 0x3a: /* XCERG */ |
3363 | s->xcer[6] = value & 0xffff; |
3364 | return; |
3365 | case 0x3c: /* XCERH */ |
3366 | s->xcer[7] = value & 0xffff; |
3367 | return; |
3368 | } |
3369 | |
3370 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
3371 | } |
3372 | |
3373 | static void omap_mcbsp_writew(void *opaque, hwaddr addr, |
3374 | uint32_t value) |
3375 | { |
3376 | struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; |
3377 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
3378 | |
3379 | if (offset == 0x04) { /* DXR */ |
3380 | if (((s->xcr[0] >> 5) & 7) < 3) /* XWDLEN1 */ |
3381 | return; |
3382 | if (s->tx_req > 3) { |
3383 | s->tx_req -= 4; |
3384 | if (s->codec && s->codec->cts) { |
3385 | s->codec->out.fifo[s->codec->out.len ++] = |
3386 | (value >> 24) & 0xff; |
3387 | s->codec->out.fifo[s->codec->out.len ++] = |
3388 | (value >> 16) & 0xff; |
3389 | s->codec->out.fifo[s->codec->out.len ++] = |
3390 | (value >> 8) & 0xff; |
3391 | s->codec->out.fifo[s->codec->out.len ++] = |
3392 | (value >> 0) & 0xff; |
3393 | } |
3394 | if (s->tx_req < 4) |
3395 | omap_mcbsp_tx_done(s); |
3396 | } else |
3397 | printf("%s: Tx FIFO overrun\n", __FUNCTION__); |
3398 | return; |
3399 | } |
3400 | |
3401 | omap_badwidth_write16(opaque, addr, value); |
3402 | } |
3403 | |
3404 | static void omap_mcbsp_write(void *opaque, hwaddr addr, |
3405 | uint64_t value, unsigned size) |
3406 | { |
3407 | switch (size) { |
3408 | case 2: return omap_mcbsp_writeh(opaque, addr, value); |
3409 | case 4: return omap_mcbsp_writew(opaque, addr, value); |
3410 | default: return omap_badwidth_write16(opaque, addr, value); |
3411 | } |
3412 | } |
3413 | |
3414 | static const MemoryRegionOps omap_mcbsp_ops = { |
3415 | .read = omap_mcbsp_read, |
3416 | .write = omap_mcbsp_write, |
3417 | .endianness = DEVICE_NATIVE_ENDIAN, |
3418 | }; |
3419 | |
3420 | static void omap_mcbsp_reset(struct omap_mcbsp_s *s) |
3421 | { |
3422 | memset(&s->spcr, 0, sizeof(s->spcr)); |
3423 | memset(&s->rcr, 0, sizeof(s->rcr)); |
3424 | memset(&s->xcr, 0, sizeof(s->xcr)); |
3425 | s->srgr[0] = 0x0001; |
3426 | s->srgr[1] = 0x2000; |
3427 | memset(&s->mcr, 0, sizeof(s->mcr)); |
3428 | memset(&s->pcr, 0, sizeof(s->pcr)); |
3429 | memset(&s->rcer, 0, sizeof(s->rcer)); |
3430 | memset(&s->xcer, 0, sizeof(s->xcer)); |
3431 | s->tx_req = 0; |
3432 | s->rx_req = 0; |
3433 | s->tx_rate = 0; |
3434 | s->rx_rate = 0; |
3435 | timer_del(s->source_timer); |
3436 | timer_del(s->sink_timer); |
3437 | } |
3438 | |
3439 | static struct omap_mcbsp_s *omap_mcbsp_init(MemoryRegion *system_memory, |
3440 | hwaddr base, |
3441 | qemu_irq txirq, qemu_irq rxirq, |
3442 | qemu_irq *dma, omap_clk clk) |
3443 | { |
3444 | struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) |
3445 | g_malloc0(sizeof(struct omap_mcbsp_s)); |
3446 | |
3447 | s->txirq = txirq; |
3448 | s->rxirq = rxirq; |
3449 | s->txdrq = dma[0]; |
3450 | s->rxdrq = dma[1]; |
3451 | s->sink_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_mcbsp_sink_tick, s); |
3452 | s->source_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_mcbsp_source_tick, s); |
3453 | omap_mcbsp_reset(s); |
3454 | |
3455 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_mcbsp_ops, s, "omap-mcbsp", 0x800); |
3456 | memory_region_add_subregion(system_memory, base, &s->iomem); |
3457 | |
3458 | return s; |
3459 | } |
3460 | |
3461 | static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) |
3462 | { |
3463 | struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; |
3464 | |
3465 | if (s->rx_rate) { |
3466 | s->rx_req = s->codec->in.len; |
3467 | omap_mcbsp_rx_newdata(s); |
3468 | } |
3469 | } |
3470 | |
3471 | static void omap_mcbsp_i2s_start(void *opaque, int line, int level) |
3472 | { |
3473 | struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; |
3474 | |
3475 | if (s->tx_rate) { |
3476 | s->tx_req = s->codec->out.size; |
3477 | omap_mcbsp_tx_newdata(s); |
3478 | } |
3479 | } |
3480 | |
3481 | void omap_mcbsp_i2s_attach(struct omap_mcbsp_s *s, I2SCodec *slave) |
3482 | { |
3483 | s->codec = slave; |
3484 | slave->rx_swallow = qemu_allocate_irqs(omap_mcbsp_i2s_swallow, s, 1)[0]; |
3485 | slave->tx_start = qemu_allocate_irqs(omap_mcbsp_i2s_start, s, 1)[0]; |
3486 | } |
3487 | |
3488 | /* LED Pulse Generators */ |
3489 | struct omap_lpg_s { |
3490 | MemoryRegion iomem; |
3491 | QEMUTimer *tm; |
3492 | |
3493 | uint8_t control; |
3494 | uint8_t power; |
3495 | int64_t on; |
3496 | int64_t period; |
3497 | int clk; |
3498 | int cycle; |
3499 | }; |
3500 | |
3501 | static void omap_lpg_tick(void *opaque) |
3502 | { |
3503 | struct omap_lpg_s *s = opaque; |
3504 | |
3505 | if (s->cycle) |
3506 | timer_mod(s->tm, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + s->period - s->on); |
3507 | else |
3508 | timer_mod(s->tm, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + s->on); |
3509 | |
3510 | s->cycle = !s->cycle; |
3511 | printf("%s: LED is %s\n", __FUNCTION__, s->cycle ? "on" : "off"); |
3512 | } |
3513 | |
3514 | static void omap_lpg_update(struct omap_lpg_s *s) |
3515 | { |
3516 | int64_t on, period = 1, ticks = 1000; |
3517 | static const int per[8] = { 1, 2, 4, 8, 12, 16, 20, 24 }; |
3518 | |
3519 | if (~s->control & (1 << 6)) /* LPGRES */ |
3520 | on = 0; |
3521 | else if (s->control & (1 << 7)) /* PERM_ON */ |
3522 | on = period; |
3523 | else { |
3524 | period = muldiv64(ticks, per[s->control & 7], /* PERCTRL */ |
3525 | 256 / 32); |
3526 | on = (s->clk && s->power) ? muldiv64(ticks, |
3527 | per[(s->control >> 3) & 7], 256) : 0; /* ONCTRL */ |
3528 | } |
3529 | |
3530 | timer_del(s->tm); |
3531 | if (on == period && s->on < s->period) |
3532 | printf("%s: LED is on\n", __FUNCTION__); |
3533 | else if (on == 0 && s->on) |
3534 | printf("%s: LED is off\n", __FUNCTION__); |
3535 | else if (on && (on != s->on || period != s->period)) { |
3536 | s->cycle = 0; |
3537 | s->on = on; |
3538 | s->period = period; |
3539 | omap_lpg_tick(s); |
3540 | return; |
3541 | } |
3542 | |
3543 | s->on = on; |
3544 | s->period = period; |
3545 | } |
3546 | |
3547 | static void omap_lpg_reset(struct omap_lpg_s *s) |
3548 | { |
3549 | s->control = 0x00; |
3550 | s->power = 0x00; |
3551 | s->clk = 1; |
3552 | omap_lpg_update(s); |
3553 | } |
3554 | |
3555 | static uint64_t omap_lpg_read(void *opaque, hwaddr addr, |
3556 | unsigned size) |
3557 | { |
3558 | struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; |
3559 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
3560 | |
3561 | if (size != 1) { |
3562 | return omap_badwidth_read8(opaque, addr); |
3563 | } |
3564 | |
3565 | switch (offset) { |
3566 | case 0x00: /* LCR */ |
3567 | return s->control; |
3568 | |
3569 | case 0x04: /* PMR */ |
3570 | return s->power; |
3571 | } |
3572 | |
3573 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
3574 | return 0; |
3575 | } |
3576 | |
3577 | static void omap_lpg_write(void *opaque, hwaddr addr, |
3578 | uint64_t value, unsigned size) |
3579 | { |
3580 | struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; |
3581 | int offset = addr & OMAP_MPUI_REG_MASK0x000007ff; |
3582 | |
3583 | if (size != 1) { |
3584 | return omap_badwidth_write8(opaque, addr, value); |
3585 | } |
3586 | |
3587 | switch (offset) { |
3588 | case 0x00: /* LCR */ |
3589 | if (~value & (1 << 6)) /* LPGRES */ |
3590 | omap_lpg_reset(s); |
3591 | s->control = value & 0xff; |
3592 | omap_lpg_update(s); |
3593 | return; |
3594 | |
3595 | case 0x04: /* PMR */ |
3596 | s->power = value & 0x01; |
3597 | omap_lpg_update(s); |
3598 | return; |
3599 | |
3600 | default: |
3601 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
3602 | return; |
3603 | } |
3604 | } |
3605 | |
3606 | static const MemoryRegionOps omap_lpg_ops = { |
3607 | .read = omap_lpg_read, |
3608 | .write = omap_lpg_write, |
3609 | .endianness = DEVICE_NATIVE_ENDIAN, |
3610 | }; |
3611 | |
3612 | static void omap_lpg_clk_update(void *opaque, int line, int on) |
3613 | { |
3614 | struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; |
3615 | |
3616 | s->clk = on; |
3617 | omap_lpg_update(s); |
3618 | } |
3619 | |
3620 | static struct omap_lpg_s *omap_lpg_init(MemoryRegion *system_memory, |
3621 | hwaddr base, omap_clk clk) |
3622 | { |
3623 | struct omap_lpg_s *s = (struct omap_lpg_s *) |
3624 | g_malloc0(sizeof(struct omap_lpg_s)); |
3625 | |
3626 | s->tm = timer_new_ms(QEMU_CLOCK_VIRTUAL, omap_lpg_tick, s); |
3627 | |
3628 | omap_lpg_reset(s); |
3629 | |
3630 | memory_region_init_io(&s->iomem, NULL((void*)0), &omap_lpg_ops, s, "omap-lpg", 0x800); |
3631 | memory_region_add_subregion(system_memory, base, &s->iomem); |
3632 | |
3633 | omap_clk_adduser(clk, qemu_allocate_irqs(omap_lpg_clk_update, s, 1)[0]); |
3634 | |
3635 | return s; |
3636 | } |
3637 | |
3638 | /* MPUI Peripheral Bridge configuration */ |
3639 | static uint64_t omap_mpui_io_read(void *opaque, hwaddr addr, |
3640 | unsigned size) |
3641 | { |
3642 | if (size != 2) { |
3643 | return omap_badwidth_read16(opaque, addr); |
3644 | } |
3645 | |
3646 | if (addr == OMAP_MPUI_BASE0xe1000000) /* CMR */ |
3647 | return 0xfe4d; |
3648 | |
3649 | OMAP_BAD_REG(addr)fprintf(stderr, "%s: Bad register " "%#08" "l" "x" "\n", __FUNCTION__ , addr); |
3650 | return 0; |
3651 | } |
3652 | |
3653 | static void omap_mpui_io_write(void *opaque, hwaddr addr, |
3654 | uint64_t value, unsigned size) |
3655 | { |
3656 | /* FIXME: infinite loop */ |
3657 | omap_badwidth_write16(opaque, addr, value); |
3658 | } |
3659 | |
3660 | static const MemoryRegionOps omap_mpui_io_ops = { |
3661 | .read = omap_mpui_io_read, |
3662 | .write = omap_mpui_io_write, |
3663 | .endianness = DEVICE_NATIVE_ENDIAN, |
3664 | }; |
3665 | |
3666 | static void omap_setup_mpui_io(MemoryRegion *system_memory, |
3667 | struct omap_mpu_state_s *mpu) |
3668 | { |
3669 | memory_region_init_io(&mpu->mpui_io_iomem, NULL((void*)0), &omap_mpui_io_ops, mpu, |
3670 | "omap-mpui-io", 0x7fff); |
3671 | memory_region_add_subregion(system_memory, OMAP_MPUI_BASE0xe1000000, |
3672 | &mpu->mpui_io_iomem); |
3673 | } |
3674 | |
3675 | /* General chip reset */ |
3676 | static void omap1_mpu_reset(void *opaque) |
3677 | { |
3678 | struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; |
3679 | |
3680 | omap_dma_reset(mpu->dma); |
3681 | omap_mpu_timer_reset(mpu->timer[0]); |
3682 | omap_mpu_timer_reset(mpu->timer[1]); |
3683 | omap_mpu_timer_reset(mpu->timer[2]); |
3684 | omap_wd_timer_reset(mpu->wdt); |
3685 | omap_os_timer_reset(mpu->os_timer); |
3686 | omap_lcdc_reset(mpu->lcd); |
3687 | omap_ulpd_pm_reset(mpu); |
3688 | omap_pin_cfg_reset(mpu); |
3689 | omap_mpui_reset(mpu); |
3690 | omap_tipb_bridge_reset(mpu->private_tipb); |
3691 | omap_tipb_bridge_reset(mpu->public_tipb); |
3692 | omap_dpll_reset(mpu->dpll[0]); |
3693 | omap_dpll_reset(mpu->dpll[1]); |
3694 | omap_dpll_reset(mpu->dpll[2]); |
3695 | omap_uart_reset(mpu->uart[0]); |
3696 | omap_uart_reset(mpu->uart[1]); |
3697 | omap_uart_reset(mpu->uart[2]); |
3698 | omap_mmc_reset(mpu->mmc); |
3699 | omap_mpuio_reset(mpu->mpuio); |
3700 | omap_uwire_reset(mpu->microwire); |
3701 | omap_pwl_reset(mpu->pwl); |
3702 | omap_pwt_reset(mpu->pwt); |
3703 | omap_rtc_reset(mpu->rtc); |
3704 | omap_mcbsp_reset(mpu->mcbsp1); |
3705 | omap_mcbsp_reset(mpu->mcbsp2); |
3706 | omap_mcbsp_reset(mpu->mcbsp3); |
3707 | omap_lpg_reset(mpu->led[0]); |
3708 | omap_lpg_reset(mpu->led[1]); |
3709 | omap_clkm_reset(mpu); |
3710 | cpu_reset(CPU(mpu->cpu)((CPUState *)object_dynamic_cast_assert(((Object *)((mpu-> cpu))), ("cpu"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 3710, __func__))); |
3711 | } |
3712 | |
3713 | static const struct omap_map_s { |
3714 | hwaddr phys_dsp; |
3715 | hwaddr phys_mpu; |
3716 | uint32_t size; |
3717 | const char *name; |
3718 | } omap15xx_dsp_mm[] = { |
3719 | /* Strobe 0 */ |
3720 | { 0xe1010000, 0xfffb0000, 0x800, "UART1 BT" }, /* CS0 */ |
3721 | { 0xe1010800, 0xfffb0800, 0x800, "UART2 COM" }, /* CS1 */ |
3722 | { 0xe1011800, 0xfffb1800, 0x800, "McBSP1 audio" }, /* CS3 */ |
3723 | { 0xe1012000, 0xfffb2000, 0x800, "MCSI2 communication" }, /* CS4 */ |
3724 | { 0xe1012800, 0xfffb2800, 0x800, "MCSI1 BT u-Law" }, /* CS5 */ |
3725 | { 0xe1013000, 0xfffb3000, 0x800, "uWire" }, /* CS6 */ |
3726 | { 0xe1013800, 0xfffb3800, 0x800, "I^2C" }, /* CS7 */ |
3727 | { 0xe1014000, 0xfffb4000, 0x800, "USB W2FC" }, /* CS8 */ |
3728 | { 0xe1014800, 0xfffb4800, 0x800, "RTC" }, /* CS9 */ |
3729 | { 0xe1015000, 0xfffb5000, 0x800, "MPUIO" }, /* CS10 */ |
3730 | { 0xe1015800, 0xfffb5800, 0x800, "PWL" }, /* CS11 */ |
3731 | { 0xe1016000, 0xfffb6000, 0x800, "PWT" }, /* CS12 */ |
3732 | { 0xe1017000, 0xfffb7000, 0x800, "McBSP3" }, /* CS14 */ |
3733 | { 0xe1017800, 0xfffb7800, 0x800, "MMC" }, /* CS15 */ |
3734 | { 0xe1019000, 0xfffb9000, 0x800, "32-kHz timer" }, /* CS18 */ |
3735 | { 0xe1019800, 0xfffb9800, 0x800, "UART3" }, /* CS19 */ |
3736 | { 0xe101c800, 0xfffbc800, 0x800, "TIPB switches" }, /* CS25 */ |
3737 | /* Strobe 1 */ |
3738 | { 0xe101e000, 0xfffce000, 0x800, "GPIOs" }, /* CS28 */ |
3739 | |
3740 | { 0 } |
3741 | }; |
3742 | |
3743 | static void omap_setup_dsp_mapping(MemoryRegion *system_memory, |
3744 | const struct omap_map_s *map) |
3745 | { |
3746 | MemoryRegion *io; |
3747 | |
3748 | for (; map->phys_dsp; map ++) { |
3749 | io = g_new(MemoryRegion, 1)((MemoryRegion *) g_malloc_n ((1), sizeof (MemoryRegion))); |
3750 | memory_region_init_alias(io, NULL((void*)0), map->name, |
3751 | system_memory, map->phys_mpu, map->size); |
3752 | memory_region_add_subregion(system_memory, map->phys_dsp, io); |
3753 | } |
3754 | } |
3755 | |
3756 | void omap_mpu_wakeup(void *opaque, int irq, int req) |
3757 | { |
3758 | struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; |
3759 | CPUState *cpu = CPU(mpu->cpu)((CPUState *)object_dynamic_cast_assert(((Object *)((mpu-> cpu))), ("cpu"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 3759, __func__)); |
3760 | |
3761 | if (cpu->halted) { |
3762 | cpu_interrupt(cpu, CPU_INTERRUPT_EXITTB0x0004); |
3763 | } |
3764 | } |
3765 | |
3766 | static const struct dma_irq_map omap1_dma_irq_map[] = { |
3767 | { 0, OMAP_INT_DMA_CH0_619 }, |
3768 | { 0, OMAP_INT_DMA_CH1_720 }, |
3769 | { 0, OMAP_INT_DMA_CH2_821 }, |
3770 | { 0, OMAP_INT_DMA_CH322 }, |
3771 | { 0, OMAP_INT_DMA_CH423 }, |
3772 | { 0, OMAP_INT_DMA_CH524 }, |
3773 | { 1, OMAP_INT_1610_DMA_CH653 }, |
3774 | { 1, OMAP_INT_1610_DMA_CH754 }, |
3775 | { 1, OMAP_INT_1610_DMA_CH855 }, |
3776 | { 1, OMAP_INT_1610_DMA_CH956 }, |
3777 | { 1, OMAP_INT_1610_DMA_CH1057 }, |
3778 | { 1, OMAP_INT_1610_DMA_CH1158 }, |
3779 | { 1, OMAP_INT_1610_DMA_CH1259 }, |
3780 | { 1, OMAP_INT_1610_DMA_CH1360 }, |
3781 | { 1, OMAP_INT_1610_DMA_CH1461 }, |
3782 | { 1, OMAP_INT_1610_DMA_CH1562 } |
3783 | }; |
3784 | |
3785 | /* DMA ports for OMAP1 */ |
3786 | static int omap_validate_emiff_addr(struct omap_mpu_state_s *s, |
3787 | hwaddr addr) |
3788 | { |
3789 | return range_covers_byte(OMAP_EMIFF_BASE0x10000000, s->sdram_size, addr); |
3790 | } |
3791 | |
3792 | static int omap_validate_emifs_addr(struct omap_mpu_state_s *s, |
3793 | hwaddr addr) |
3794 | { |
3795 | return range_covers_byte(OMAP_EMIFS_BASE0x00000000, OMAP_EMIFF_BASE0x10000000 - OMAP_EMIFS_BASE0x00000000, |
3796 | addr); |
3797 | } |
3798 | |
3799 | static int omap_validate_imif_addr(struct omap_mpu_state_s *s, |
3800 | hwaddr addr) |
3801 | { |
3802 | return range_covers_byte(OMAP_IMIF_BASE0x20000000, s->sram_size, addr); |
3803 | } |
3804 | |
3805 | static int omap_validate_tipb_addr(struct omap_mpu_state_s *s, |
3806 | hwaddr addr) |
3807 | { |
3808 | return range_covers_byte(0xfffb0000, 0xffff0000 - 0xfffb0000, addr); |
3809 | } |
3810 | |
3811 | static int omap_validate_local_addr(struct omap_mpu_state_s *s, |
3812 | hwaddr addr) |
3813 | { |
3814 | return range_covers_byte(OMAP_LOCALBUS_BASE0x30000000, 0x1000000, addr); |
3815 | } |
3816 | |
3817 | static int omap_validate_tipb_mpui_addr(struct omap_mpu_state_s *s, |
3818 | hwaddr addr) |
3819 | { |
3820 | return range_covers_byte(0xe1010000, 0xe1020004 - 0xe1010000, addr); |
3821 | } |
3822 | |
3823 | struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, |
3824 | unsigned long sdram_size, |
3825 | const char *core) |
3826 | { |
3827 | int i; |
3828 | struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) |
3829 | g_malloc0(sizeof(struct omap_mpu_state_s)); |
3830 | qemu_irq dma_irqs[6]; |
3831 | DriveInfo *dinfo; |
3832 | SysBusDevice *busdev; |
3833 | |
3834 | if (!core) |
3835 | core = "ti925t"; |
3836 | |
3837 | /* Core */ |
3838 | s->mpu_model = omap310; |
3839 | s->cpu = cpu_arm_init(core); |
3840 | if (s->cpu == NULL((void*)0)) { |
3841 | fprintf(stderrstderr, "Unable to find CPU definition\n"); |
3842 | exit(1); |
3843 | } |
3844 | s->sdram_size = sdram_size; |
3845 | s->sram_size = OMAP15XX_SRAM_SIZE0x00030000; |
3846 | |
3847 | s->wakeup = qemu_allocate_irqs(omap_mpu_wakeup, s, 1)[0]; |
3848 | |
3849 | /* Clocks */ |
3850 | omap_clk_init(s); |
3851 | |
3852 | /* Memory-mapped stuff */ |
3853 | memory_region_init_ram(&s->emiff_ram, NULL((void*)0), "omap1.dram", s->sdram_size); |
3854 | vmstate_register_ram_global(&s->emiff_ram); |
3855 | memory_region_add_subregion(system_memory, OMAP_EMIFF_BASE0x10000000, &s->emiff_ram); |
3856 | memory_region_init_ram(&s->imif_ram, NULL((void*)0), "omap1.sram", s->sram_size); |
3857 | vmstate_register_ram_global(&s->imif_ram); |
3858 | memory_region_add_subregion(system_memory, OMAP_IMIF_BASE0x20000000, &s->imif_ram); |
3859 | |
3860 | omap_clkm_init(system_memory, 0xfffece00, 0xe1008000, s); |
3861 | |
3862 | s->ih[0] = qdev_create(NULL((void*)0), "omap-intc"); |
3863 | qdev_prop_set_uint32(s->ih[0], "size", 0x100); |
3864 | qdev_prop_set_ptr(s->ih[0], "clk", omap_findclk(s, "arminth_ck")); |
3865 | qdev_init_nofail(s->ih[0]); |
3866 | busdev = SYS_BUS_DEVICE(s->ih[0])((SysBusDevice *)object_dynamic_cast_assert(((Object *)((s-> ih[0]))), ("sys-bus-device"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 3866, __func__)); |
3867 | sysbus_connect_irq(busdev, 0, |
3868 | qdev_get_gpio_in(DEVICE(s->cpu)((DeviceState *)object_dynamic_cast_assert(((Object *)((s-> cpu))), ("device"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 3868, __func__)), ARM_CPU_IRQ0)); |
3869 | sysbus_connect_irq(busdev, 1, |
3870 | qdev_get_gpio_in(DEVICE(s->cpu)((DeviceState *)object_dynamic_cast_assert(((Object *)((s-> cpu))), ("device"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 3870, __func__)), ARM_CPU_FIQ1)); |
3871 | sysbus_mmio_map(busdev, 0, 0xfffecb00); |
3872 | s->ih[1] = qdev_create(NULL((void*)0), "omap-intc"); |
3873 | qdev_prop_set_uint32(s->ih[1], "size", 0x800); |
3874 | qdev_prop_set_ptr(s->ih[1], "clk", omap_findclk(s, "arminth_ck")); |
3875 | qdev_init_nofail(s->ih[1]); |
3876 | busdev = SYS_BUS_DEVICE(s->ih[1])((SysBusDevice *)object_dynamic_cast_assert(((Object *)((s-> ih[1]))), ("sys-bus-device"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 3876, __func__)); |
3877 | sysbus_connect_irq(busdev, 0, |
3878 | qdev_get_gpio_in(s->ih[0], OMAP_INT_15XX_IH2_IRQ0)); |
3879 | /* The second interrupt controller's FIQ output is not wired up */ |
3880 | sysbus_mmio_map(busdev, 0, 0xfffe0000); |
3881 | |
3882 | for (i = 0; i < 6; i++) { |
3883 | dma_irqs[i] = qdev_get_gpio_in(s->ih[omap1_dma_irq_map[i].ih], |
3884 | omap1_dma_irq_map[i].intr); |
3885 | } |
3886 | s->dma = omap_dma_init(0xfffed800, dma_irqs, system_memory, |
3887 | qdev_get_gpio_in(s->ih[0], OMAP_INT_DMA_LCD25), |
3888 | s, omap_findclk(s, "dma_ck"), omap_dma_3_1); |
3889 | |
3890 | s->port[emiff ].addr_valid = omap_validate_emiff_addr; |
3891 | s->port[emifs ].addr_valid = omap_validate_emifs_addr; |
3892 | s->port[imif ].addr_valid = omap_validate_imif_addr; |
3893 | s->port[tipb ].addr_valid = omap_validate_tipb_addr; |
3894 | s->port[local ].addr_valid = omap_validate_local_addr; |
3895 | s->port[tipb_mpui].addr_valid = omap_validate_tipb_mpui_addr; |
3896 | |
3897 | /* Register SDRAM and SRAM DMA ports for fast transfers. */ |
3898 | soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->emiff_ram), |
3899 | OMAP_EMIFF_BASE0x10000000, s->sdram_size); |
3900 | soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->imif_ram), |
3901 | OMAP_IMIF_BASE0x20000000, s->sram_size); |
3902 | |
3903 | s->timer[0] = omap_mpu_timer_init(system_memory, 0xfffec500, |
3904 | qdev_get_gpio_in(s->ih[0], OMAP_INT_TIMER126), |
3905 | omap_findclk(s, "mputim_ck")); |
3906 | s->timer[1] = omap_mpu_timer_init(system_memory, 0xfffec600, |
3907 | qdev_get_gpio_in(s->ih[0], OMAP_INT_TIMER230), |
3908 | omap_findclk(s, "mputim_ck")); |
3909 | s->timer[2] = omap_mpu_timer_init(system_memory, 0xfffec700, |
3910 | qdev_get_gpio_in(s->ih[0], OMAP_INT_TIMER316), |
3911 | omap_findclk(s, "mputim_ck")); |
3912 | |
3913 | s->wdt = omap_wd_timer_init(system_memory, 0xfffec800, |
3914 | qdev_get_gpio_in(s->ih[0], OMAP_INT_WD_TIMER27), |
3915 | omap_findclk(s, "armwdt_ck")); |
3916 | |
3917 | s->os_timer = omap_os_timer_init(system_memory, 0xfffb9000, |
3918 | qdev_get_gpio_in(s->ih[1], OMAP_INT_OS_TIMER22), |
3919 | omap_findclk(s, "clk32-kHz")); |
3920 | |
3921 | s->lcd = omap_lcdc_init(system_memory, 0xfffec000, |
3922 | qdev_get_gpio_in(s->ih[0], OMAP_INT_LCD_CTRL31), |
3923 | omap_dma_get_lcdch(s->dma), |
3924 | omap_findclk(s, "lcd_ck")); |
3925 | |
3926 | omap_ulpd_pm_init(system_memory, 0xfffe0800, s); |
3927 | omap_pin_cfg_init(system_memory, 0xfffe1000, s); |
3928 | omap_id_init(system_memory, s); |
3929 | |
3930 | omap_mpui_init(system_memory, 0xfffec900, s); |
3931 | |
3932 | s->private_tipb = omap_tipb_bridge_init(system_memory, 0xfffeca00, |
3933 | qdev_get_gpio_in(s->ih[0], OMAP_INT_BRIDGE_PRIV13), |
3934 | omap_findclk(s, "tipb_ck")); |
3935 | s->public_tipb = omap_tipb_bridge_init(system_memory, 0xfffed300, |
3936 | qdev_get_gpio_in(s->ih[0], OMAP_INT_BRIDGE_PUB28), |
3937 | omap_findclk(s, "tipb_ck")); |
3938 | |
3939 | omap_tcmi_init(system_memory, 0xfffecc00, s); |
3940 | |
3941 | s->uart[0] = omap_uart_init(0xfffb0000, |
3942 | qdev_get_gpio_in(s->ih[1], OMAP_INT_UART114), |
3943 | omap_findclk(s, "uart1_ck"), |
3944 | omap_findclk(s, "uart1_ck"), |
3945 | s->drq[OMAP_DMA_UART1_TX12], s->drq[OMAP_DMA_UART1_RX13], |
3946 | "uart1", |
3947 | serial_hds[0]); |
3948 | s->uart[1] = omap_uart_init(0xfffb0800, |
3949 | qdev_get_gpio_in(s->ih[1], OMAP_INT_UART215), |
3950 | omap_findclk(s, "uart2_ck"), |
3951 | omap_findclk(s, "uart2_ck"), |
3952 | s->drq[OMAP_DMA_UART2_TX14], s->drq[OMAP_DMA_UART2_RX15], |
3953 | "uart2", |
3954 | serial_hds[0] ? serial_hds[1] : NULL((void*)0)); |
3955 | s->uart[2] = omap_uart_init(0xfffb9800, |
3956 | qdev_get_gpio_in(s->ih[0], OMAP_INT_UART315), |
3957 | omap_findclk(s, "uart3_ck"), |
3958 | omap_findclk(s, "uart3_ck"), |
3959 | s->drq[OMAP_DMA_UART3_TX18], s->drq[OMAP_DMA_UART3_RX19], |
3960 | "uart3", |
3961 | serial_hds[0] && serial_hds[1] ? serial_hds[2] : NULL((void*)0)); |
3962 | |
3963 | s->dpll[0] = omap_dpll_init(system_memory, 0xfffecf00, |
3964 | omap_findclk(s, "dpll1")); |
3965 | s->dpll[1] = omap_dpll_init(system_memory, 0xfffed000, |
3966 | omap_findclk(s, "dpll2")); |
3967 | s->dpll[2] = omap_dpll_init(system_memory, 0xfffed100, |
3968 | omap_findclk(s, "dpll3")); |
3969 | |
3970 | dinfo = drive_get(IF_SD, 0, 0); |
3971 | if (!dinfo) { |
3972 | fprintf(stderrstderr, "qemu: missing SecureDigital device\n"); |
3973 | exit(1); |
3974 | } |
3975 | s->mmc = omap_mmc_init(0xfffb7800, system_memory, dinfo->bdrv, |
3976 | qdev_get_gpio_in(s->ih[1], OMAP_INT_OQN23), |
3977 | &s->drq[OMAP_DMA_MMC_TX21], |
3978 | omap_findclk(s, "mmc_ck")); |
3979 | |
3980 | s->mpuio = omap_mpuio_init(system_memory, 0xfffb5000, |
3981 | qdev_get_gpio_in(s->ih[1], OMAP_INT_KEYBOARD1), |
3982 | qdev_get_gpio_in(s->ih[1], OMAP_INT_MPUIO5), |
3983 | s->wakeup, omap_findclk(s, "clk32-kHz")); |
3984 | |
3985 | s->gpio = qdev_create(NULL((void*)0), "omap-gpio"); |
3986 | qdev_prop_set_int32(s->gpio, "mpu_model", s->mpu_model); |
3987 | qdev_prop_set_ptr(s->gpio, "clk", omap_findclk(s, "arm_gpio_ck")); |
3988 | qdev_init_nofail(s->gpio); |
3989 | sysbus_connect_irq(SYS_BUS_DEVICE(s->gpio)((SysBusDevice *)object_dynamic_cast_assert(((Object *)((s-> gpio))), ("sys-bus-device"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 3989, __func__)), 0, |
3990 | qdev_get_gpio_in(s->ih[0], OMAP_INT_GPIO_BANK114)); |
3991 | sysbus_mmio_map(SYS_BUS_DEVICE(s->gpio)((SysBusDevice *)object_dynamic_cast_assert(((Object *)((s-> gpio))), ("sys-bus-device"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 3991, __func__)), 0, 0xfffce000); |
3992 | |
3993 | s->microwire = omap_uwire_init(system_memory, 0xfffb3000, |
3994 | qdev_get_gpio_in(s->ih[1], OMAP_INT_uWireTX2), |
3995 | qdev_get_gpio_in(s->ih[1], OMAP_INT_uWireRX3), |
3996 | s->drq[OMAP_DMA_UWIRE_TX7], omap_findclk(s, "mpuper_ck")); |
3997 | |
3998 | s->pwl = omap_pwl_init(system_memory, 0xfffb5800, |
3999 | omap_findclk(s, "armxor_ck")); |
4000 | s->pwt = omap_pwt_init(system_memory, 0xfffb6000, |
4001 | omap_findclk(s, "armxor_ck")); |
4002 | |
4003 | s->i2c[0] = qdev_create(NULL((void*)0), "omap_i2c"); |
4004 | qdev_prop_set_uint8(s->i2c[0], "revision", 0x11); |
4005 | qdev_prop_set_ptr(s->i2c[0], "fclk", omap_findclk(s, "mpuper_ck")); |
4006 | qdev_init_nofail(s->i2c[0]); |
4007 | busdev = SYS_BUS_DEVICE(s->i2c[0])((SysBusDevice *)object_dynamic_cast_assert(((Object *)((s-> i2c[0]))), ("sys-bus-device"), "/home/stefan/src/qemu/qemu.org/qemu/hw/arm/omap1.c" , 4007, __func__)); |
4008 | sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(s->ih[1], OMAP_INT_I2C4)); |
4009 | sysbus_connect_irq(busdev, 1, s->drq[OMAP_DMA_I2C_TX4]); |
4010 | sysbus_connect_irq(busdev, 2, s->drq[OMAP_DMA_I2C_RX3]); |
4011 | sysbus_mmio_map(busdev, 0, 0xfffb3800); |
4012 | |
4013 | s->rtc = omap_rtc_init(system_memory, 0xfffb4800, |
4014 | qdev_get_gpio_in(s->ih[1], OMAP_INT_RTC_TIMER25), |
4015 | qdev_get_gpio_in(s->ih[1], OMAP_INT_RTC_ALARM26), |
4016 | omap_findclk(s, "clk32-kHz")); |
4017 | |
4018 | s->mcbsp1 = omap_mcbsp_init(system_memory, 0xfffb1800, |
4019 | qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP1TX12), |
4020 | qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP1RX13), |
4021 | &s->drq[OMAP_DMA_MCBSP1_TX8], omap_findclk(s, "dspxor_ck")); |
4022 | s->mcbsp2 = omap_mcbsp_init(system_memory, 0xfffb1000, |
4023 | qdev_get_gpio_in(s->ih[0], |
4024 | OMAP_INT_310_McBSP2_TX4), |
4025 | qdev_get_gpio_in(s->ih[0], |
4026 | OMAP_INT_310_McBSP2_RX5), |
4027 | &s->drq[OMAP_DMA_MCBSP2_TX16], omap_findclk(s, "mpuper_ck")); |
4028 | s->mcbsp3 = omap_mcbsp_init(system_memory, 0xfffb7000, |
4029 | qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP3TX10), |
4030 | qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP3RX11), |
4031 | &s->drq[OMAP_DMA_MCBSP3_TX10], omap_findclk(s, "dspxor_ck")); |
4032 | |
4033 | s->led[0] = omap_lpg_init(system_memory, |
4034 | 0xfffbd000, omap_findclk(s, "clk32-kHz")); |
4035 | s->led[1] = omap_lpg_init(system_memory, |
4036 | 0xfffbd800, omap_findclk(s, "clk32-kHz")); |
4037 | |
4038 | /* Register mappings not currenlty implemented: |
4039 | * MCSI2 Comm fffb2000 - fffb27ff (not mapped on OMAP310) |
4040 | * MCSI1 Bluetooth fffb2800 - fffb2fff (not mapped on OMAP310) |
4041 | * USB W2FC fffb4000 - fffb47ff |
4042 | * Camera Interface fffb6800 - fffb6fff |
4043 | * USB Host fffba000 - fffba7ff |
4044 | * FAC fffba800 - fffbafff |
4045 | * HDQ/1-Wire fffbc000 - fffbc7ff |
4046 | * TIPB switches fffbc800 - fffbcfff |
4047 | * Mailbox fffcf000 - fffcf7ff |
4048 | * Local bus IF fffec100 - fffec1ff |
4049 | * Local bus MMU fffec200 - fffec2ff |
4050 | * DSP MMU fffed200 - fffed2ff |
4051 | */ |
4052 | |
4053 | omap_setup_dsp_mapping(system_memory, omap15xx_dsp_mm); |
4054 | omap_setup_mpui_io(system_memory, s); |
4055 | |
4056 | qemu_register_reset(omap1_mpu_reset, s); |
4057 | |
4058 | return s; |
4059 | } |